Longview Custom Towing Mirrors Installation - 2010 Chevrolet Silverado

content loading

Customers compare CTM1600 to these similar products

Products Featured in this Video

How to Install the Longview Custom Towing Mirrors on a 2010 Chevrolet Silverado

Today on our 2010 Chevrolet Silverado we'll be doing a test fit on the Longview Original Custom Towing Mirror, Part Number CTM1600. It offers us a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up while towing a trailer. As you can see, I'm visible in the towing mirror but not the factory mirror. The towing mirror is going to contour our factory mirror nicely. It's going to make it look like it's all one piece.

If you look at our mirror here, we can adjust it to most angles. We've got it up and down, side to side, and diagonal. You can see how it's not going to interfere with the operation of our factory mirror. We can even still fold it in. I'm here at the driver's side of my Chevrolet Silverado, and to begin our test fit we'll first need to make sure that our factory mirror is clean of any dirt and debris. That way we can easily slide on our custom towing mirror.

With that being cleaned off, let's go ahead and grab the portion of our hardware with the flat end, as you see here. We're actually going to put it through like this so that the flat portion is on the outside. Then we can start sliding on our mirror. We'll make sure that it stays lined up with the edge here. We'll push it all the way on until it stops. Then we can take this portion of our bracket here.

We'll slide it on to the end here, and let's go ahead and put on one of our thumb screws, get that started a few threads. Then we'll take this with the hook on the end. We'll slide it through here, go ahead and put another thumb screw on. Just get a few threads on there. Then we can come around to the front.

The idea is to be able to push or pull to where the hook clips on to our factory mirror just like that. Then we can tighten up the knobs on the back side to insure a tight fit. You just repeat the same process for the passenger side, and then you're ready to tow. That's going to complete our test for the Longview Original Custom Towing Mirror, Part Number CTM1600, on our 2010 Chevrolet Silverado.

Questions and Comments about this Video

add comment

Info for this part was:

Test Fit:
Joe V
Video Edited:
Zack K
Video Edited:
Andrew K
Test Fit:
Patrick B
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Patrick B
Test Fit:
Matthew K
Video Edited:
Andrew L
Video Edited:
Dustin K
Test Fit:
Cole B
Test Fit:
Shane T
Video Edited:
Chad S
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Hayden R
Video by:
Zach D
Test Fit:
Andrew S
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.