K Source Universal Clip-On Towing Mirror Installation - 2014 Ram 1500

content loading



Customers compare KS3891 to these similar products




Products Featured in this Video



How to Install the K Source Universal Clip-On Towing Mirror on a 2014 Ram 1500


Today on our 2014 Ram 1500, we're going to be installing the K Source Universal Towing Mirror, Part number Ks3891. It comes with the two straps that we're going to use to tighten around the back of our factory mirror. It comes with a mirror with adjustable arms, so that way it is going to fit a wide variety of factory installed mirrors, and it's got the clips on the back for our straps to fit into. We'll go ahead an apply this to our driver side. We'll show you how it installs. We're going to take these clips and we're going to fit them into the area above and below the factory mirror. Once we've got those on there, then we're ready to move around to the back side and install our straps.

We'll take the clip and hook into the space up top, bring it around the bottom and repeat that same process. With our clip in place, we'll go and install our second strap. We're just going to do that the same way. With those on there, we're ready to tighten everything up. We'll flip open our buckle. It's going to allow us to gain access to the ratcheting lever.

We'll just give that a few quick pulls and that's going to take the slack out of our strap, giving us a nice, secure fit on the inner most part of our factory mirror. You can see how this nice rubber pad also is going to contour around the shape of your mirror. It's really going to provide a good fit for a universal application. Close that one up and then repeat that process for this side. With just those quick couple steps our mirror is on there and we're ready to go. This mirror is manually adjustable, so it just has like a little ball joint back here that it's going to pivot on.

You see this right here, so you can move it any direction that you need to. You can just see how secure it is cause the only parts that are moving is this towing mirror and it's not really readjusting the straps or shaking around the factory mirror. The other neat thing is, it's going to be able to rotate 360 degrees, so that way you can make sure that you have the correct angle that's going to best suit your towing application. This does have a couple different features that makes this a universal application. The mounting arms will rotate outward to accommodate different factory mirrors, and the pivoting joints in the middle of the arms allow further adjustability. This will fit most mirrors ranging from 4 and 1/2 inches to 11 and 1/2 inches in height.

The overall dimensions will adjust from 4 and 1/2 inches to 14 inches tall by 14 and 1/2 inches in width. This is a universal application, so not only is it designed to fit a wide variety of mirrors, it will also fit both the passenger and driver side of your vehicle. That's going to complete today's install of the K Source Universal Towing Mirror, Part number KS3891 on our 2014 Ram 1500. .


Questions and Comments about this Video

add comment

Info for this part was:

Test Fit:
Joe V
Video Edited:
Zack K
Video by:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Patrick B
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Test Fit:
Cole B
Test Fit:
Shane T
Video by:
Alan C
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Hayden R
Test Fit:
Savanna B
Video Edited:
Zach D
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Video by:
Jonathan Y
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.