Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Toyota Sienna
Customers compare HR8500 to these similar products
Products Featured in this Video
Review of the Hollywood Racks Traveler Hitch Bike Rack on a 2013 Toyota Sienna
Today on our 2013 Toyota Sienna we'll be test fitting the Hollywood Racks Traveler Hitch-Mounted 4-Bike Rack. Part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread on our anti-rattle bolts and tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the 2 fit together. We have about 10 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 2 1/4 inch away.
We've added about 7 inches to the overall length of our Toyota. We can now pull the pin at the top of the mast and swing the cradle arms out. With the cradle arms out, we've added about 20 1/2 inches to the overall length of our Sienna. To access the cargo area, we can pull the pin at the base of the mast and tilt the carrier down. As you can see, we can easily gain access to the rear hatch. To load up a bike, we'll make sure the mast is in its upright position. We'll undo the cradle straps, place our bike into the frame cradles and then secure it with the straps. With our bike all loaded up, that'll complete today's test fit for the Hollywood Racks Traveler.
Part number HR8500 on our 2013 Toyota Sienna. .
Info for this part was:
Video by:
Zack K
Video by:
Andrew K
Video by:
Patrick B
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Installed by:
Rick A
Test Fit:
Matthew K
Test Fit:
Sabrina B
Test Fit:
Cole B
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Keith V
Test Fit:
Jared G
Test Fit:
Savanna B
Test Fit:
Zach D
Test Fit:
Ryan G
Test Fit:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.