Step-By-Step Installation Tutorial for the etrailer Trailer Hitch Receiver on a 2022 Ram 1500 Video

Firstly congratulations on the purchase of your new 2022 Ram 1500! When it comes to installing the perfect trailer hitch for your vehicle I recommend The etrailer Trailer Hitch Receiver #e28ZR. I like this hitch over the Curt hitch because it has an…

Hey Chris, I'd love to help you get a hitch for your 2023 Ram 1500! The etrailer Trailer Hitch Receiver #e98852 is designed for the previous generation Ram trucks to your 2023 so it would require you to modify your truck to get it to fit. I'm…

We have a similar etrailer hitch that fits your 2021 Ram 1500 Classic with the part #e98852, but the #e28ZR fits the non-Classic models.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer Trailer Hitch Receiver #e98852 measures 7-3/4" from center of hole to center of hole on the back plate. The holes are 1-1/2" to the center of the hole from the top of the receiver on the back plate(see image).

I went out to the warehouse to measure the hole spacing on Curt trailer hitch #13333 for you. The holes are spaced 7-3/4 inches apart on center. This is a custom fit hitch designed for the following vehicles: 2004 - 2014 Dodge Ram Pickup 1500 Series,…

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

I can understand why you'd think that the Curt Trailer Hitch Receiver #C13419 wouldn't be as solid and sturdy. However, the hitch receiver is designed to bolt up to your bumper beam, which is then bolted to your truck's frame on both…

No, you aren't missing anything, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13419 does have a high torque requirement. There are torque wrenches that go up that high but the standard ones do max at 150-200 foot lbs. You…

We have the Draw Tite hitch part #75662 which is a confirmed fit for your 2006 Dodge Ram 3500 without the factory trailer hitch. And since it installs by attaching at the center of the rear of the vehicle your suspension setup would not interfere.

For your Lippert Rhino 21,000lb pin box I recommend the MORryde Cushioned 5th Wheel Pin Box - Lippert Rhino - 21,000 lbs Item #MR83QR.

Most of the photos I've seen of the Keystone Passport show a rear-mounted spare tire that would interfere with mounting a bike rack in a rear mounted hitch. If you don't have a spare tire, the Curt #13703 would work for you. A rack mounted on…