How to Install: Dometic FanTastic Roof Vent w/ 12V Fan and Thermostat on your 1917 Ford Model T Video

If the original fan was in fact a Fan-Tastic Vents 4000B then it was a pretty standard size, 12v RV vent fan. Since you do not want the remote feature, you can use the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250. This vent fan will work to replace…

The best way to measure for a replacement roof vent with fan is to measure the size of the rough opening in your trailer's roof. This can be easily measured by removing the garnish around the vent on the inside of the trailer and measuring the…

Yes, to replace the center piece of the Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size #319EZ you need the part #CCP-60C.

According to my contact at Dometic, that thermostat is no longer available as a replacement part. Unfortunately, this means the only solution is to replace the entire fan. I recommend the Fan-Tastic Vent Roof Vent #FV803350. This has 3 manual speeds,…

You will have to manually turn the fan of the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250 off after closing the lid of the roof vent.

Yes, it looks like your existing Fan-Tastic Fan model 4000BT is a standard 14" wide x 14" long roof vent so the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part #MA00-05100K would fit the opening for your old vent as long as the roof…

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 is the correct replacement for all bow-tie style bracket, motor, blade assemblies. This will fit your model 5000RBT fan (also known as #FV802250).

You can use an RJ11 cable with the #MA59FR but some of the functions might not work properly. We've found that sometimes some of the functions will work backwards. What your best option would be is the communication cable part #MA69FR.

I've linked our selection of roof vents for you to take a look at and choose which you like. The most popular is the Fan-Tastic Vent #FV802250. It's a manual vent with a 12 volt fan.

The Tie-Downs for the Reese Elite for the Ram trucks are indeed sold separately as part #RP30145. They are sold individually, so you'll need two of them. The tie downs are intended to be used in the rear pucks, according to Reese.

To remove the fan blade of a Fan Tastic Roof Vent #FV802250 you will need to first remove the screen on the underside. You will want to then remove the vent cover lid from the outside of the trailer as well. There are four screws from the top of the…

I spoke with my contact at Roadmaster and I have the following measurements for the Roadmaster MS Base Plate Kit - Fixed Arms Item #1437-3. The rectangular plate is 6-11/16 inches long by 4 inches tall overall. The mounting holes are spaced 5-3/16…