DIY Install: Draw-Tite Max-Frame Trailer Hitch Receiver on your 2019 BMW X3 Video

Hello Michelle. Congrats on the new BMW X3! I have 2 different options for you to choose from. First is the Hidden Hitch by Draw-Tite Trailer Hitch Receiver - Custom Fit - 2" #DT56GR, this hitch is great because you can remove the 2"…

Honestly Ladd, not much. All of the hitches: the Curt #C13387, Draw-Tite #76226, and etrailer are basically the same size, weight (30 lbs), and have the same weight capacities. The only thing separating these hitches is going to be the actual brand…

The Hidden Hitch by Draw-Tite Trailer Hitch Receiver part #DT56GR is very similar in design to the Draw-Tite Max-Frame Trailer Hitch Receiver part #76226. Therefore, you can use the install video I have attched for you for help with installation.…

Hello Greg, I cannot personally see any difference between the M40i and sDrive for the 2019 BMW X3. We haven't done an install on the M40i, so I can't say for sure what the difference would be regarding the #C99RV hitch and #SH46FR for…

Hey Phil, yes Stealth does offer an additional harness with the part #SH62VR to enable trailer mode that we don't. With that harness you wouldn't need to make a trip to the dealer but you will need to basically do a remote session with a BMW…

Installing the trailer wiring with the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #SH62VR will not disable the backup sensors. So, with the harness installed your factory sensors will still work when in reverse.

The bolts that hold the L brackets for the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW #FA94-00-0600 need to be torqued to a specific setting which you can find in your installation instructions (as well…

Yes, the Draw Tite hitch part #76226 that you referenced does fit your 2023 BMW X4. This only has the hitch opening that hangs below the rear bumper so it's mostly hidden as well.

When installing The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK77FR on your 2018 BMW X3 once the harness is installed and plugged into the trailer, trailer mode is activated. The trailer wiring harness has a simple plug and…

No, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #TK77FR does not require you to have your car recoded. It is a good idea to disconnect your battery and then reattach the battery to your system after the install…

I can certainly point you in the right direction. The Dometic Duo Therm 3107541.009 is a model that we see fairly frequently. Now I do not have literature on your specific camper that will tell me if it is ducted or ductless, but the Advent units we…

From what I could find, your Dometic DOTR12CW measured 21-7/8" wide x 16-1/8" tall x 16-5/8" deep; the closest we have to that measurement which is a similar standard microwave is the 19-1/16" wide x 13-5/8" tall x…