Mount: Draw-Tite Max-Frame Trailer Hitch Receiver on a 2011 Audi Q5 Video

Hi Brian; the reason you aren't seeing an anti-rattle hitch pin for towing is because they're all designed to fit hollow shanks. A ball mount like the #BWTS10035B you were looking at is going to have a solid shank which means the anti-rattle…

The best trailer hitch for a bike rack on your 2016 Audi Q5 is easily the Draw-Tite Max-Frame Trailer Hitch #75940 because it offers the best bumper clearance and ground clearance of the hitches that fit your vehicle. This is a 2" hitch with a…

The best lock for the etrailer Adjustable 2-Ball Mount item #e66PR is our Hitch Receiver Lock item #e98881. This lock fits both 2" and 2-1/2" receivers. It has the option to be keyed alike as well.

The Draw Tite hitch part #75940 is pretty well hidden as only the hitch opening pokes through the rear fascia. I attached a picture of what it looks like installed to give you an idea.

Not all trailer hitches have trailer wiring mounts on them like the Draw Tite part #75940 that you referenced. I would even say that most actually do not. Especially on designs like the #75940 where only the hitch opening hangs below the rear bumper.…

I would be happy to help you. For a Draw-Tite Hitch on your 2016 Audi SQ5 you will want item #75940. This hitch is custom fit and bolts directly to your Audi's frame with included hardware. To add a brake controller you will need two separate…

That's a good question but no, the bumper on your 2015 Audi Q5 will not be damaged more easily and will not be more fragile with the installation of the Draw-Tite Max-Frame Trailer Hitch Receiver #75940. The bumper support is directly replaced by…

One of the steps when installing Draw-Tite trailer hitch #75940 on a 2012 Audi Q5 is that you need to disconnect the electrical plug under the scuff plate in the cargo area. It is possible that the connector was not plugged back in. It could also…

The fascia trimming required for your 2012 Audi Q5 will be the same despite the different appearance from what is in the instructions. To be clear make sure you are looking at the first part of the trimming instructions because the second part is for…

Yes we have trailer wiring harnesses that fit your 2014 Audi Q5 like the Curt #C56404 which installs easily by plugging in line with the taillight wiring of the vehicle.

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56404 is a confirmed fit for your 2017 Audi Q5 and fits behind both the driver and passenger side rear access panels. I've attached the installation instructions…

In order to tow a trailer with a 2014 Audi Q5 you'll need a trailer hitch, trailer wiring harness, brake controller (if applicable), and ball mount/hitch ball. The Draw-Tite Max-Frame Trailer Hitch Receiver part #75940 is a great option to start…