bing tracking image

Draw-Tite Ball Mount Review - 2013 Ford F-150

content loading

Review of the Draw-Tite Ball Mount on a 2013 Ford F-150


Today on our 2013 Ford F150 well be test fitting the Draw Tite ball mount for two inch hitches, part number 2923. Before we begin our test fit, we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19 inches. This measurement may vary due to tire size and aftermarket accessories. Now well go ahead and slide the shank of the ball mount into the opening of the hitch in the drop position, align up our pin holes and secure it with the pin and clip.

Well then measure from the ground to the top of the ball platform, and well get a measurement of about 17 inches. If your trailer ride height matches ours, which is the measurement from the ground to the bottom of the coupler while your trailer is level, this would be an appropriate ball mount for you. Now well go ahead and flip the ball mount over into the rise position, and again, if your trailer ride height matches ours, this would be an appropriate ball mount for you. That completes todays test fit for Draw Tite ball mount for two inch hitches, part number 2923 on our 2013 Ford F150.