Step-By-Step Installation Tutorial for the 22-1/2x49 Curt Cargo Carrier on a 2019 Buick Enclave Video

The 24x60 Curt Cargo Carrier for 2" Hitches #C18152 is going to sit 11-1/4" out from the center of the hitch pin hole to closest edge of carrier. The Bestop TrekStep Truck Bumper Step #BE42CV is going to sit directly to the left of…

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the…

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in…

The best hitch for your 2023 Honda Passport is going to be the Curt Trailer Hitch Receiver item #C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it installs right below your rear…

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you…

I spoke with my contact at Tork Lift and he informed me that the TorkLift Lock and Load #TLA7752 that you referenced has a 500 lb capacity. I attached a review video for you to check out as well.

The tray dimensions of the #TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x…

Exhaust melting cargo on a cargo carrier isn't a super common problem, but we are aware that it does happen on occasion. Especially if the cargo carrier is at the same height as the exhaust, relatively close to it, and/or the material in the…

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

I have a solution for you but I don't have any options for heat shields to protect your cargo when mounted on the Flint Hill Goods Cargo Carrier item #FHG27ZR. This will be an issue with any cargo carrier or accessory you mount on your Forester…

I contacted Curt and the inside dimensions of the Curt Cargo Carrier for 2" Hitches part #C18113 are 49" long x 22-1/2" wide x 4" tall. That is the usable space inside the carrier according to the tech at Curt.

In most cases Loctite is not required when installing a trailer hitch, but it would not be a bad idea. I suggest using the Loctite Blue Stick Threadlocker, #LT37643, which will provide a secure grip and protect against water and grime.