Customers compare AMSC4 to these similar products
Products Featured in this Video
Today on our 2013 Kia Sorrento well be test fitting the Convert-a-ball cushion ball mount for two inch hitches, part number AMSC4. Before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 13 inches. Now well go ahead and slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and secure it with a pin and clip. Well then measure from the ground to the top of the ball platform and get a measurement of 8 inches.
If your trailer ride height which is the measurement from the ground to the bottom of the coupler while your trailer is level matches ours this will be an appropriate ball mount for you. Now well go ahead and flip the ball mount over to its rise position and measure from the ground to the top of the ball platform and well get a measurement of 16 inches. Again if your trailers ride height matches ours this will be an appropriate ball mount for you. That completes todays test fit for the Convert-a-ball cushion ball mount for two inch hitches, part number AMSC4, on our 2013 Kia Sorrento.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.