Classic Accessories Quick-Fit UTV Bench Seat Cover Installation - 2010 Kawasaki Mule

content loading

How to Install the Classic Accessories Quick-Fit UTV Bench Seat Cover on a 2010 Kawasaki Mule


Today in our 2010 Kawasaki Mule, we'll be installing the QuadGear Extreme Classic Accessory Quick-Fit UTV bench seat cover, camo color, part number CA18034. Now to being our install we'll first start with the seat back. Taking the passenger side, we'll wrap both edges around the top and bottom pulling it tight until we get all the way over to the driver's side and wrap it around the other side of the seat. Then once in position and adjusted, we can pull it tight with the expanded cord and push-button clip. There you have it, one piece of our seat cover is installed and secured. Next, we'll do the bench seat. First, we'll turn it over, we'll release the three hook and loop straps.

We'll flip our cover over and start installing it over the bench seat. Once again, we'll start on the passenger side, pulling it tight as we go to the driver's side. Once we have it fully wrapped around the seat and in place, we'll secure it with the hook and loop straps. We'll feed the hook and loop up underneath the seat and strap it underneath. We'll repeat the same process for the center and third straps.

Once we have all three straps in place and secured, we'll go ahead and lower the seat back down. There you have it, in just a few, quick minutes, we've installed the Quick-Fit UTV bench seat cover, part number CA18034, on our 2010 Kawasaki Mule. .


Questions and Comments about this Video