Products Featured in this Video
Today on our 2007 Dodge Ram pickup we'll be installing the Cipa Custom Towing Mirrors on the driver side, Part Number 10701. As you can see here, the outer towing mirror is a manual mirror but can be adjusted in many different angles. The new Cipa towing mirror does not interfere with your factory mirror at all. As you can see here, you still have full range of motion with your factory mirror. With the Cipa towing mirror installed, it allows you to see whatever you're towing behind you in a much greater field of vision behind your vehicle than you'd have with your factory mirrors. We need to begin by installing the protective strip on the wedge shaped piece that goes between the mirror and the towing mirror.
Simply pull the backing off the 2 sided adhesive and install it on the wedge. Now that that's done, we're ready to install our new towing mirror. As you slide the towing mirror over the factory mirror, you work the wedge shape piece in behind, you'll notice how there's a groove on the backside of the towing mirror. This wedge works into this groove and lines up with the hole that's in the back side of the towing mirror where the plastic knob will thread in locking the towing mirror, the wedge, and the factory mirror all in place. We'll go ahead and tighten down the plastic knob which locks the towing mirror, the wedge, and the mirror itself in place. Now for the passenger side of the vehicle the Cipa custom towing mirror is Part Number 10702.
That's it for the installation of the Cipa Custom Towing Mirror Part Number 10701 on our 2007 Dodge Ram pickup. .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
