bing tracking image

Camco RV Slide-Outs Corner Guards Installation

content loading

How to Install the Camco RV Slide-Outs Corner Guards


Today we're going to be installing the Camco RV Slide Out Corner Guards. The Camco RV Slide Out Corner Guards in a white color part number CAM42193 on our fifth wheel camper. This product is also available in a black color, that's part number CAM42203. It's going to go right here. Those of you with a slide out know and this is out, this is hazard to your kids, dogs to even you sometimes. You come around the corner, that's a sharp spot.

This right here is the solution to that. You can get an alcohol swab to prep the area. You get four of these corners, you get four of these two-sided adhesive pads that will go on the back first and then it'll go here. We're going to go ahead and prep our corners up here. We need to put our two-sided tape onto these and then we'll peal it off when it comes time to stick it on our slide out corner.

The kit comes with enough to do two slide outs, front and back and a front and back so we're going to be doing actually two slide outs today. Before we can begin though we're going to need to take our alcohol pad that comes with the kit, we need to clean the underside so that we get a good adhesion from the two-sided tape. We'll go ahead and clean a couple of these up. We're going to go ahead and do all four of them and get them ready to go. Since we only get one wipe with the kit, we'll go ahead and clean the corners off while we're at it before this one dries out on us. We're going to go ahead and do it on this slide on the side of the camper as well.

Press that firmly in that position, go ahead and get two of those prepped up. Let's go out here and see how it will fit. As you could see here it has slide sticks out just a little bit. It should be able to get this on just fine without cringing the slide out. We'll go ahead and just peal the backing off and slide them in and press firmly.

See, now we got a soft edge instead of that sharp edge that could hurt somebody when they come around the corner either person or a pet and we'll go ahead and repeat the process for the front corner. We've already gone ahead and install the two-sided tape on the back of this other set for the second slider so now we just need to peal the backing off and install them. With that, that all conclude our installation. The Camco RV Slide Out Corner Guards in a white color part number CAM42193 on our fifth wheel camper. .


Questions and Comments about this Video