BedRug Custom Full Truck Bed Liner Installation - 2019 Chevrolet Colorado

content loading



Customers compare BRB15CCK to these similar products




Products Featured in this Video



How to Install the BedRug Custom Full Truck Bed Liner on a 2019 Chevrolet Colorado


Hi there, Colorado owners. Today on your 2019 Chevrolet Colorado, we're going to be taking a look at and showing you how to install the BedRugs' custom-fit bed rug for your Colorado's truck bed. The bed rug's going to be a great way to protect the bed of your truck, just like with any other cargo liner. Whether it be a drop in or a spray in. Except this is also going to provide an extra layer of cushion. So if you have certain objects that you like to haul but they're a little more sensitive, this is going to be a great option to get it transported safely to your destination.And while this is great for those more sensitive items because it gives you a soft surface, don't be afraid to use it like a regular truck bed.

It's a carpet-like material but is extremely durable. So you can go ahead and throw wood back here, throw in some mulch and use your shovel and just dig right in and scoop it out. You're not going to tear this.And if you're worried about what's it going to look like when I throw some dirt and mud back there Well, just like your truck bed and any other liner, you can spray it out with a hose and clean it just like those. It's made as a anti-absorption fabric, so it's not going to hold and absorb water. So it will dry quickly so it's not going to mildew.It's custom-fit to the contours of your Colorado's truck bed, so it's going to drop right in and it's going to look great.

You can see how it just forms and molds right to it. You can even see the brace pillars on the side as it's molded around those factory ones underneath.If you're installing this for more sensitive items, or really doesn't matter what you're putting back here, but you want to protect those items as well, so it goes great with a tonneau cover. We have tonneau covers available here at etrailer.com so you can get a stylish carpet in the back with a stylish tonneau cover on top. It's also great for camper shelves, especially if you like to spend some time back here tailgating.Now that we've gone over some of the features, let's go over the installation together so you can have the confidence to do it at home. We'll begin our installation by cleaning out our truck bed.

You'll want a clean surface to work with when putting your carpet in. I've already got ours cleaned out so we're ready to start putting the carpet in.We'll then take the hook and loop fasteners that come in our kit and attach it to the underside of our carpet. The instructions lay out where to place these, but it's pretty obvious for the most part. The long one is going to go on the outer edge here, and you will have to trim this to fit. And there are going to be several small ones that you'll place on the one that's towards the inside.

We'll also have a couple here that'll run down as well. Those all just push in place.We're going to do the same thing with our side pieces. So put all those on as well. For the side pieces that run down the truck bed rails, you'll find some small markings to help you position those. It's kind of just like a little indented line there and that'll help you position your small pads when spacing them apart.We can now zip the two pieces together. This'll be easier if you do it just outside on the floor in your garage. Line up the ends, slide them together, and then just run the zipper down. Just take your time going around the corners. It is going to be a little bit difficult to make that turn. We can then flip it inside out and set it inside the bed.Once you've got it positioned in there, take one side and peel it back, exposing our adhesive. Peel the adhesive backing off of it. Then we can roll it down into place, making sure it stays all the way up against the cab there. Then you can stick it down. You'll then want to hold it in place for about 15 to 20 seconds to ensure a good adhesion.We're now going to repeat this for all the remaining adhesives. We're going to start working our way from the center and then work our way out. So underneath here at the bottom first. Then we'll do our back, our sides, and work our way towards the back. If they don't line up properly, just peel your hook and loop off and move it over until it lines up with a flat surface. We've got all of ours lined up pretty well, so we're just going to pull all these off and then stick it in place.On the sides, when you get towards the top, we're going to be tucking it under the rails. And now you do have the option here if you have a tow hook, you can make a slit in the fabric to poke it through if you so desire. We're going to repeat that on the other side as well. And then we'll repeat that same process when we get our way down here to the tailgate. With our tailgate stuck down, we can then close it and make sure everything fits properly. And that completes our installation of BedRugs' custom-fit bed rug for your 2019 Chevrolet Colorado.


Questions and Comments about this Video

add comment

Info for this part was:

Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Hayden R
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.