BedRug Custom Full Truck Bed Liner Installation - 2014 Chevrolet Silverado 1500

content loading

Customers compare BRC07SBK to these similar products

Products Featured in this Video

How to Install a BedRug Custom Full Truck Bed Liner on a 2014 Chevrolet Silverado 1500 BRC07SBK

Hi there, Silverado owners. Today in our 2014 Chevrolet Silverado, we're going to be taking a look at and showing you how to install BedRugs Bed Liner. BedRugs Bed Liner is going to provide a custom fit protection for the back of your truck that's going to prevent any scratches or abrasions from occurring to the paint on the back of your truck, because it's got this nice padded foam carpet that's going to be soft as well as durable. What I like about this carpet is that you can treat it just like any other Bed Liner, you can throw anything you want back here, whether it be mulch or wood, and when you're done you can just hose it right on out. You don't have to worry about any mold or mildew build up with this type either. It's got an anti-mold coating on it, like you would have on your boat carpets, it's a similar material and feel as those are.So you can see here that it's custom fit.

It has the wheel wells molded into the carpet, as well as the panelings, where it dips in on the sides. It just follows your body lines all the way around, which gives it an appealing look as well as superior protection and staying power. Since it's custom fit around all these components, it's held into place using adhesive pads, with hook and loop fasteners, but also being custom molded forms it to the shape of your truck and keeps it in place. And when using the BedRug, you still have full access to your tie-down loops. You can just make a small slit and they just poke right on through, and it looks like they we're supposed to be there the whole time.One of the things I really liked about it, though, especially if you do a lot of work in your truck is how thick the padding is.

I'm constantly getting in and out of the back, moving things around, and sometimes I'm just working out of the back of my truck like it's a work bench. And having the padding all across the truck is so much easier on my knees. Definitely feel it at the end of the day, how much nicer it is compared to what it used to be. Unlike your traditional Bed Liners so that either just set in place with a plastic molding or spray in, this one's going to be easily removable with the hook and loop fasteners. And when we're ready to put it back in, we can just slap it back down.Things I like about this a little better than the plastic liners, the plastic ones they're hard and they tend to hold water underneath them, which can cause rust.

This here is breathable, so air can go through the fabric to allow it to completely dry out, which prevents mold and also prevents rusting of the components that is beneath it. Your BedRug pairs great with tunnel covers, which gives you a large padded area to store those sensitive items with. Maybe you're in a band and you need to move some speakers, BedRug in the back's going to be great for putting all of your sensitive equipment in and then a tunnel cover will keep it secure by keeping out of the sight and out of mind, and also giving you an option to lock everything up here in the back. It's a pretty quick and easy installation. There's no cutting or drilling required.

Let's go over that now so you can have the confidence to do it at home.You'll begin your installation by cleaning out your bed, it's best to have a clean bed before putting your BedRug in so you don't trap any of that dirt underneath. We can now take the hook and loop fasteners that come in our kit and start applying them to the underside of our BedRug. We're going to start with the biggest piece and apply those. So we're using the medium length strips that come in our kit and putting those right onto the area that's designated on the bottom for it to go. We are then going to do the same thing on the other side, where there's a location already marked out here for this strip. We're now at the other end of our large piece, and this is going to be our tailgate end here. You'll have a strip cross. This is the bottom here and this is actually at the top here. Across the top, we're going to use the second longest piece that comes in our kit, and you may have to trim this down to length afterwards. And it just sticks on just like all the rest of our hook and loop fastener as well.For the bottom row, we're going to be using the smaller ones that come in your kit, they just rip off and we're going to put five across here, so just to evenly space those across. I like to do one on each side, one in the middle, one on the opposite side, and then I can just put one in between. We've now got our back inside piece, you can see this here and how it would run around down the sides. We've got it upside down, so this is our zipper, so this is actually the bottom and that makes this the top. Our top piece, we're going to use the longest strip that comes in our kit, and that's going to stick from one side to the other. And just like on the tailgate, if you need to, you can trim at the end. And just like at the bottom of our tailgate, we're going to have five of the smaller strips evenly spread across.And then on our side sheets, we're going to look for these little marks right here. You'll have these little lines and you'll see them as they go down. We're going to be ripping off a small strip and placing one at each place where it's marked on the top row, as well as our middle row here. We're going to repeat this for the remaining marks on this side, as well as the ones on the other side. Now don't worry if you mess one of these up, you are going to receive some extras in your kit. So if you do mess any up, you'll have some to replace those and you can take the extras, but what I usually do is just use some of these extras in some spots, also maybe you could use a little bit better adhesion and you can go ahead and stick those on there.We can now zip our two halves together, so you want to line up your zippers. So take your two zipper pieces, push them together and then just start zipping it up. It's a little tighter to zip it when you're coming around curves. So you just got to work it a little bit, it'll get there. Just try to hold the pieces together when you're zipping it and just have to go little by little. Once you've got it all zipped up, you can then walk it into your truck. You can then just fold it out and tuck it in, getting it fit the way we want it to fit. So now we can lift up our BedRug. We'll use the swab that comes in the kit just to wipe off the area that we're going to be sticking it to, peel off the backing and then roll it down in place and stick it on. We'll then repeat that for the other side. And now we're going to repeat that same process for the remaining sticky pads. I'm going to start with the back panel first and then work my way down the sides.Now when putting your side panels on, you may notice that the tow hooks here on the inside of your bed, your tie-down points are interfering and it's going to keep our BedRug sticking out. You could just have a bulge there, but I highly recommend that you cut the slit there, so that way it'll sit flush and we're not overstressing our adhesive pads holding it in place then. So we're just going to take a razor knife, you can almost see there's a notched out mark that's already there where that would go, so you can just follow that notched out mark and just use your razor knife. Now double double-check your bed before doing so because your bed may not have all the exact same tie-downs that we have on this particular options for this truck. And now our tow hook will push right through the fabric so we can still access it, and it's also not interfering with the installation of our BedRug. When you're running down your side panel, you also need to tuck it underneath the paneling as you go.A small trim panel tool can sometimes help tuck it underneath if you need it at certain points. And we cut out here for the rear hook as well, just like we did the front hook, and now we're going to repeat the exact same process on the opposite side to get that side installed. With both of our sides, the bottom and back in, all we have left is our tailgate now. So what I like to do first is line it up, get an idea of where this is going to sit. Then we can go back to this side and just like we did with the rest of them, we're going to peel off the adhesive backing and stick it in place. I've already wiped it down. I did run out of the pad that it came with to prep the area. So if you run out of the included prep pad, you can use some alcohol on a cloth, that'll work just fine, some ice inaudible 00:11:13 alcohol.So we're getting an idea where this is going to sit. And then lastly, we can move on to the large strip at the top and stick that in place. Now you'll want to check fit on your tailgate, make sure that it opens and closes okay. And your installation is now complete. And that completes our look at BedRugs Bed Liner on your 2014 Chevrolet Silverado.

Questions and Comments about this Video

Info for this part was:

Employee Andrew K
Video Edited:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Hayden R
Installed by:
Hayden R
Employee David F
Test Fit:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.