Andersen Rapid Hitch Ball Mount Review - 2012 Ford F-150

content loading

Customers compare AM3410 to these similar products




Products Featured in this Video



Review of the Andersen Rapid Hitch Ball Mount on a 2012 Ford F-150


Today on our 2012 Ford F150, were going to be test fitting the Anderson Adjustable Rapid Hitch, part number AM3410. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount kit well inert it into the receiver tube of our hitch, line up the hitch pin holes and secure it with the pin and clip. We have the ball set at the highest configuration.

At its highest setting, when we measure from the ground to the top of the ball platform we get 19 inches. Now well set the ball platform to its lowest type. At its lowest setting we measure 13 inches from the ground to the top of the ball platform. The ball mount can be just adjusted anywhere in between in one-inch increments. On the ball platform itself are both 2-inch and 2-5/16 inch balls.

Thats it for our test fit of the Anderson Rapid Hitch adjustable ball mount, part number AM3410 on our 2012 Ford F150.


Questions and Comments about this Video

Info for this part was:

Test Fit:
Joe V
Test Fit:
Zack K
Test Fit:
Patrick B
Test Fit:
Rick A
Test Fit:
Matthew K
Test Fit:
Cole B
Video by:
Andrew K
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.