bing tracking image

Adco Motorhome Mirror and Wiper Blade Covers Review - 2017 Tiffin Allegro Motorhome

content loading

Customers compare 290-2378 to these similar products

Products Featured in this Video

Review of the Adco Motorhome Mirror and Wiper Blade Covers on a 2017 Tiffin Allegro Motorhome

What's going on RV owners, Adam here at etrailer. Today on our 2017 Tiffin Allegro RV. We're going to be taking a look at the ADCO windshield wiper and mirror covers. Our covers are going to be made of a vinyl material. It's going to keep all that sun out and all the water too. And we do have diamond plated here, but we also have camo if that is something you're into.

You're an RV owner and you own something like this, you really want to protect your investment. It's kind of a lot of dough to buy one of these things, and it's a lot of fun taking it out. So you want to make sure it looks good and you take care of it wherever you may be. So if you're in the cold climate, this is going to protect it from cracking or anything like that. During the really hot climate like today, super hot, it's going to keep the little rubber fins on our windshields nice and good.

It's not going to crack over time, which is always a plus. And it's just going to make it a little bit better to clean your front windshield. If you keep your blades clean, it's going to keep your windshield clean, which is awesome. On the inside, you can kind of see here, it's a nice soft material, so it's not going to scratch anything. And it's definitely not going to do anything to your mirrors or your wiper blades.

I just always encourage you guys to get as many products that are going to take care of your investment, whether you're just looking for resale value, or you just want your rig to be brand new for the years that you have, this is going to be a great way to keep it that way. Being completely honest, it doesn't really look that great, especially this down here, all up top, everything's good fits well, but just down here, it's just kind of odd getting it around, but it does cover the whole entire plastic housing that bolts to our RV. So it does the job. Does it look great doing it Not entirely, but I would rather have a not faded mirror than have this on there and people look at it and think it looks a little weird. I think it looks fine and it gets the job done.

It does come in a carrying case. It all fits in there pretty nicely. And it's just going to stow into one of the many storage compartments you have on your Allegro. It takes hours and hours for these components to fade over time. And it only takes me a couple of minutes to put them on. So I'm going to show you how I got it on. First things first, take the bag, a little hook and loop on the end and we can grab all the goodies out of it. We can set this inside for later. Now, as you can see we have all of our different pieces here. So kind of get them out, familiarize yourself with them and get ready to install. So in one section, we're going to have some hook and loop, go ahead and undo that. And once that's undone, what we want to do and take the close section and bring it like this. We're going to put the front of our blade in here, just like that then we can go ahead and kind of pull this out a little bit to get this wrapped around and hooked in just like that. We'll make sure it's nice and sealed. And we are good. So now we can take our mirror covers. What we want to do is get way up there. I am not that tall, so if you aren't, I need to get a ladder or something. I can do it, I know I can. All right. So once we get that over, that fits really well. This next part is a little weird, so we have hook and loop on both sides. So basically what we want to do is kind of wrap this around to where it's going to hook onto itself. We do want to make sure that we have a gap at the bottom just in case it does rain and some water gets in there. So we have some gap right here and of course, if any of that water comes down this little tube it'll work. But now I have it kind of covered up all the plastics, all of our mirror. I think we are ready to go. And that'll do it for a look at the ADCO windshield wiper and mirror covers on our 2017 Tiffin Allegro..

Questions and Comments about this Video

Info for these parts were:

Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Chris R
Video by:
Chris R
Employee John S
Video by:
John S
Employee Adam E
Test Fit:
Adam E
Employee Clayton O
Test Fit:
Clayton O
Employee Evangeline M
Test Fit:
Evangeline M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.