Hey everybody, Ryan here at etrailer. Today, we're gonna be talking about how to choose a brake controller that's gonna be right for you and your particular application. When it comes to picking out a trailer brake controller for your particular setup, things can get overwhelming pretty quick. There's just so many different options out there. And so many available things can start to get… see more >
Videos
Help Articles
Expert Answers
On your model year, in some instances GM ran a orange and blue wire from under the brake master cylinder to the rear of the vehicle, along the drivers side frame rail. If this wiring is in place, all of the rest of the connections must be wired into…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hey Kevin, thanks for reaching out! Yes, the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED98CR has the brake controller and wiring adapter needed to install on your 2021 Toyota 4Runner factory tow package. Attached is an installation…
view full answer...That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…
view full answer...In order to flat-tow your 2009 Honda CR-V with four wheels downs, which is the recommended way to tow this vehicle according to the owner's manual, you will need base plates, a tow bar, safety cables, a supplemental brake system, a flat-tow…
view full answer...Yes, the red light on the Hayes Syncronizer Trailer Brake Controller #HA81725 will come on whenever you apply your tow vehicle's brakes, even when no trailer is connected. However, no power is used when there isn't a trailer detected.
view full answer...If your 2013 Nissan Armada came with a factory installed 7-Way trailer connector as part of its tow package then yes, use can use harness #3050-P for your P3 brake controller #90195. If your Armada did not come with a 7-Way then you would need to add…
view full answer...To complete your flat tow setup on the 2018 Jeep JK Wrangler along with the Black Hawk tow bar you need the following: Braking System - If your motor home has hydraulic brakes I recommend Demco SBS Stay-IN-Play DUO Supplemental Braking System -…
view full answer...If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…
view full answer...The features and equipment that constitute an auto maker's OEM "tow package" can vary by vehicle manufacturer, vehicle model and model year. Auto makers may change the elements of a "tow package" for any number of reasons. The…
view full answer...The etrailer Tongue Weight Scale for Campers and Utility Trailers #e99044 does not have the ability to be calibrated but would not need it.
view full answer...Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…
view full answer...