Best 2019 Audi Q7 Trailer Wiring Options

content loading



Customers compare 119190KIT to these similar products




Products Featured in this Video




Best 2019 Audi Q7 Trailer Wiring Options


Hi there Audi owners. Today we're going to be looking at the best vehicle wiring options for our 2019 Audi Q7.Here we have our two best wiring options. The option on the left is the one from Curt. And the option on the right is the one from Tekonsha. And in most svac's these wiring harnesses are going to be basically identical but there are a very minor differences between them and we'll cover those now.This is our Tekonsha harness, and as you can see, the module is relatively small which is nice to be able to fit it into smaller areas. Versus our Curt here, which is quite a bit larger.As you can see here on our 2014 Audi Q7 we've got the smaller Tekonsha module installed and we're able to take our wiring and tuck it all up into the little compartment behind our tail light.

Whereas if we we're using our Curt, the Curt itself would take up just about all the space inside of our compartment here leaving no place for our wiring which would require us to route it into another location and store it somewhere else, making a lot more work for us.I will say however, the Curt does have a higher output at 5 amps on the stop turn circuit, while our Tekonsha only has 4.2 amps on the stop turn.They both offer 7.5 amps on the tail lights. So if you need that higher output for your stop and turn circuit on your trailer, if you've got a lot of lights, big light bars for your tail light assemblies, then the Curt may be the better option for you.Other than that our harnesses are basically identical. They're going to have the same outputs to make the connections to your vehicle, you're going to get a length of wire to run it to your battery, you'll have your fuse protection, and they're both going to come with quick splices, zip ties, and sticky pads to get everything mounted up.Now regardless of which module you chose you will have to quick splice your wiring into your existing wiring on your vehicle. Both of our modules are going to be fuse protected and they do come with a fuse harass, however, on a Q7 if you have the option to hook it to a fuse panel in the back it's going to save you a lot of time rather than running it up to your battery. You can purchase fuse taps here at e-trailer.com to make your installation much easier.So in conclusion when it comes to the overall power output I'm gonna have to give that to the Curt because it does have more on the stop turn circuit.But when it comes to the ease of installation I'm gonna have to give that to Tekonsha because of it's smaller module size.

And this can really make or break it when it comes to the install, if the module don't fit the whole things a bust. So, in my personal opinion I would go with Tekonsha due to that smaller size.And that completes our look at the best vehicle wiring options on our Audi Q7.


Questions and Comments about this Video

add comment

Info for these parts were:

Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Jacob H
Installed by:
Cole B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.