Best 2014 Nissan Rogue Select Hitch Options

content loading




Products Featured in this Video





Best 2014 Nissan Rogue Select Hitch Options


Today on our 2014 Nissan Rogue Select, we're going to be looking at the Hidden Hitch class III, part number 87663, the Draw Tite class III, part number 75902, the Curt class II, part number 36542 and the Curt class III, part number C13204. Now at first glance all of our Nissan hitches that we have here are going to look the same. We've got very subtle differences in the hitches that we're going to point out to you to really help out in deciding which one is going to work the best. Our Hidden Hitch and our Draw Tite, they're essentially the same hitch. Something that they do have that you're not going to see with your Curts is going to be the dual pin setup here on the side. What that does is the rear hole, the hole closest to the front of the vehicle takes the standard 5/8ths inch pin just like your other class III Curt here but they've got that second hole right there on the front. That's what really stands apart from the Curt. This is going to allow you to use that J pin stabilization device.

Another stand out that we see here is going to be our class II Curt hitch. The class II Curt has a little smaller profile. It's going to look a little smaller on the rear of the vehicle. It's actually the one that we've got installed on the Rogue there today. This is going to allow us to still haul our bike racks, still gives us good towing capacity but it's not so big and bulky on the rear of the car.

The fourth one that we've got here at the bottom, this is going to be our Curt class III. This one really has some stand out features to it, or stand out advantages. One is going to be, with the Rogues we tend to run into an issue to where the hitch is tucked underneath the rear of the vehicle quite a ways. Some bike racks, some cargo carriers, they just don't want to work properly with it. This is going to give us the pin hole location furthest to the rear of the vehicle. This hitch is going to give us the most opportunity for those items to work.

From the rear of the bumper to the center of the hitch pin hole, it's only 5 inches. The same is going to be said for our class II here, 5 inches from the center of the hitch pin hole to the outermost edge of our bumper, whereas with our Draw Tite and with our Hidden Hitch, we've got 5 3/4 of an inch so those holes are going to be further underneath the rear of the vehicle by 3/4 of an inch. Another stand out feature about the Curt that can be important if you plan on towing, you're going to have that camper or some kind of trailer behind you, the tongue weight rating on this is actually 525 pounds. For the other two class IIIs that we have, it's 350 and our class II is 300. Now as far as gross trailer weight rating, 3,500, 3,500, 3,500, and 3,500. The advantage that we have is going to be just in that tongue weight. Aesthetically, on the vehicle we're not going to see a big difference between our hitches.

The way they're designed, just this lower section, just the receiver tube is all that's going to be exposed below our bumper. The little plate that we have here on top is going to rest snugly right up against the bottom of that bumper, leaving our actual main tubes hidden from sight. You can see on the end of the class II Curt, Draw Tite and Hidden Hitch, they've got opened ends. Our Curt has an opened end as well, but it's a much smaller diameter hole. That might prevent some of that dirt, debris and stuff from getting in there causing corrosion down the road. Now the class II option that we have here available, it's going to be slightly different. Like our Hidden Hitch, Draw Tite and the Curt, they're going to have the 5/8ths pin hole diameter. The class II uses a half inch pin hole, so half inch accessories and things like that are what we're going to want to use. Also, the pricing differences with your inch and a quarter vs your 2 inches, it's not that much different, so if you want the most adaptable and most commonly used hitches out there, the 2 inches are probably going to be your preference. If you already have a bike rack at home that fits only an inch and a quarter hitch, well that's going to be your guy. There's no sense in buying another bike rack to fit a different hitch when there's one that's available here that can do a great job. Don't overlook it if you like a nice clean looking hitch and you've already got some accessories to fit it but if you're new into it and you're just getting going, the 2 inch options here, it's going to give you a little more versatility. Now as far as safety chain connection points go, these are going to be exactly the same. Same diameter bar, same width on them. One thing we're going to notice a slight, slight difference is, is with our inch and a quarter tube being a little bit smaller by well, about 3/4 of an inch. That's going to open these up just a little bit but really no usable difference. Now the differences we'll notice as far as how it looks on the car, you see we talked about how nice and tucked up it is, how we don't see our main cross tube here, we talked about how this pin hole's in a little bit different location. On our Draw Tite and our Hidden Hitch, it will move from this location 3/4 of an inch farther back under the vehicle, so it will be about in this area, which can make it a little more of a challenge to get the bike racks and stuff like to fit on here properly. Now the two Curts, well there's the inch and a quarter or the 2 inch, to the inside top edge of the receiver tube opening here, it's 13 1/2 inches. On the Draw Tite and the Hidden Hitch to that opening, it's 14 inches. Now that could be slight variations in the tape measures we use and stuff like that. They're going to be pretty close here, but there will be a half inch difference. That's not really a big deal. It's going to still give us good ground clearance there at the back. The main, the key thing that we want to focus on is the 3/4 of an inch that we gain here moving that back just slightly. Now that we've had a look at the four most popular hitches available for our Nissan Rogue, we hope this will help you make an informed buying decision. If not, don't forget our team of experts will be standing by to answer any questions you might have.

Info for these parts were:

Test Fit:
Joe V
Video by:
Andrew K
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Video by:
Andrew L
Video Edited:
Kathleen M
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Brent H
Test Fit:
Robert C
Video by:
Alan C
Video Edited:
Sue W
Video Edited:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.