Menu Icon

Best 2009 Volvo XC90 Trailer Hitch Options

content loading



Customers compare 75152 to these similar products




Products Featured in this Video




Best 2009 Volvo XC90 Trailer Hitch Options


Speaker 1: Today we're going to be taking a look at the best hitches available for the 2009 Volvo XC90. Now both the hitches that we're going to be comparing today are going to be Class 3-rated hitches. That means they're going to have the 2" by 2" receiver tube opening. From the CURT we have part number 13559, and from Draw-Tite, part number 75152.Now both of these hitches are designed to fit in behind the rear fascia. What we're going to be left with hanging down, just going to be the receiver tube opening and our safety chain connection points. Now the receiver tube openings are slightly different.

You'll see the CURT's going to have the flush-style reinforcement collar, where the Draw-Tite's, it's going to be a little bit more rounded. Also, the safety chain connection points are different. You can see on our Draw-Tite we've got the rolled steel-style safety chain connection point with plenty of room to get whatever size chain connected we might want to, whereas when we look at the CURT you can see it's more of a vertical plate that comes down. Now for most of the smaller safety chains, I don't think you're going to have any issues connecting to that, but I definitely prefer the accessibility of the Draw-Tites just a little bit more.Now as far as weight ratings are concerned, with the CURT we're going to have a 350 pound tongue weight rating. That's going to be the maximum downward force we can put at our receiver tube opening, where with the Draw-Tite it's going to give us a 500 pound tongue weight rating.

The CURT offers a 3,500 pound gross trailer weight rating. That's the total weight of the trailer and anything we might load up on it. With the Draw-Tite, it's going to be 5,000. Both hitches are also rated for use with weight distribution. The Draw-Tite and the CURT are going to have the same ratings at a 500 pound tongue weight rating and a 5,000 pound gross trailer weight rating.Now what this means essentially is that the Draw-Tite's going to offer a little bit stiffer of a hitch.

In the deflection department, maybe if you've got a really big bike rack on there, something like that, we're not going to have the flex in that that we might get with the CURT. Now keep in mind you will want to check the owner's manual of your XC90 to see what its tow ratings are and not exceed those.Now installation of our two hitches is also going to be extremely similar. They're going to use the exact same three mounting locations on both sides, so nothing changes there. However, with the thickness of the CURT plate here versus the Draw-Tite being more narrow, the Draw-Tite's going to install with absolutely no modifications to the vehicle at all, where the CURT, while it's really not going to be seen up underneath the vehicle, we will have to square off our fascia just a little bit to allow room for this plate to come through.Now one additional thing you notice on the Draw-Tite hitch is this little bracket that's been welded onto the backside. This is made to accept wiring, whether you're doing four-pole wiring, maybe you want a seven-pole round plug, the pre-drilled holes are going to allow you to attach brackets to them to secure that wiring.

Something you want to keep in mind, in most general applications the wiring is designed to stay in the back hatch of the XC90, so you'll have to pull up your tire tools and use the small grommet below it to run that plug outside of the vehicle if you choose to.Now here's a good look at one of our hitches installed. This happens to be the Draw-Tite just show you have an idea. Main differences are going to be with the CURT we're not going to have this and we'll have that more flush reinforcement collar. Have more of a plate back here for our safety chain connection points. Now the reason we're down here is just to talk about measurements slightly. The Draw-Tite hitch, from the inside top edge of the receiver tube opening here to the ground, is going to give us the most ground clearance out there at 15". The CURT is going to be about 3/4" lower. The bottom of this is also going to be about 3/4" lower. It's plenty of ground clearance. I don't think it's going to be that big of an issue for you.The other measurement I want to talk about's the center of the hitch pin hole here to the outermost edge of our bumper. With the Draw-Tite hitch we're looking at about 6". With the CURT hitch we're going to bring that out about 1-3/4". That's going to be about 4-1/4". Now that's going to help out a lot when it comes to having space between a folding cargo carrier maybe or a folding-style platform bike rack that folds up against the rear of the vehicle. That 1-3/4" can make a pretty big difference there in giving you the room you need to actually use it and be able to fold it up or not.Now let's do a quick summary to firm up some of this information. When it comes to recreational usages, and recreational usages we're going to consider bike racks, cargo carriers, or any other Class 3 type accessory that might go on there to help you out with something, I think that the Draw-Tite is going to be the better in this situation because it does have that higher tongue weight rating, which as we said before, that's going to eliminate some of the flex. Although, if you are using a cargo carrier or a bike rack with a very short shank, that 1-3/4" that that pin hole moves back will be a little bit of an advantage there, only in that situation though. Think with your 4-bike racks and your 5-bike racks, or your bigger cargo carriers, the Draw-Tite's definitely going to be the way to go.Now when it comes to towing applications, if you're regularly going to be using the hitch for towing, again, we're going to go with the Draw-Tite. Just has the higher weight rating, the higher trailer weight rating. Means it's going to be stiffer and a little bit more sturdy, but it also has that bracket for attaching our wiring. If you're regularly going to be towing a trailer, it's nice to have the wiring on the outside of the vehicle rather than having to fish it out of the back hatch.The last thing we'll look at's going to be the ease of installation. Now while both hitches are going to go in almost identically to one another, the CURT does require a small fascia cut, again giving the Draw-Tite the advantage. That's going to complete our look at the best hitches available for the Volvo XC90. We hope you find this information helpful in selecting the hitch that's going to be right for you.

Info for these parts were:

Test Fit:
Joe V
Video Edited:
Zack K
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video by:
Alan C
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.