bing tracking image

Trailer Wiring Harness Installation - 1993 Chevrolet S-10 Pickup

content loading

How to Install a Trailer Wiring Harness on a 1993 Chevrolet S-10 Pickup


Today on this 1993 Chevrolet S-10 Pickup truck we are going to install part number 118312 from Tow Ready, their T-One wiring connector. On the driver side frame rail of the vehicle you will see a connection point for the electrical harness right here. What you need to do is take the harness and split it apart and insert the T-One. It snaps right back into place. Then the other half. Then we will take our ground wire and ground it to the bottom of the frame right here. We will take our 4-pole wiring harness and we will just run it along the factory wiring and out to our hitch ball on our bumper. Use a few zip ties to hold everything in place and we will be good to go. Get rid of the excess and with that our install is complete. There you have it for part number 118312 from Tow Ready.






^
About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
77
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.