Customers compare AKBRKR-SP to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Mike, thanks for reaching out! The Replacement Trailer Brake Magnet Kit #BP01-110 has the exact same dimensions as your old magnet so this will fit and work perfectly!
view full answer...All of the kits you mentioned are spring kits for brake assemblies. Since you said you have 10 inch assemblies the part #AKBRKR-SP is most likely what you need as it fits this size and most common brake assembly brands.
view full answer...If you are going to try and find specific replacement parts for a set of electric trailer brakes then you need to know what brand you have and around the time they were made. If you do not have this then you have two options, trial and error or…
view full answer...For your Dexter axle, you will want the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,000 lbs #K23-472-473-00. These assemblies are 10" diameter x 1-1/2" wide. If you just want the individual components:…
view full answer...For the inner bearing you need #LM67048 and race #LM67010. The outer bearing is #L44649 and race #L44610. The seal is #10-42.
view full answer...Since we don't carry the spring kit you need and you are wanting to replace the magnets and brake pads as well your best option would be to go with the new brake assembly set part #23-47-48.
view full answer...Your Dexter 8-283 brake drum will use a #10-42 grease seal. If you are looking to replace all the races, bearings and seals you will want the following components per hub. Inner Bearing #LM67048 Inner Race #LM67010 Outer Bearing #L44649 Outer Race…
view full answer...Hey Mike, we do have a replacement hub/drum that works with the 3k rated Dexter brake assemblies part #K23-472-00 with the part #DX62KR.
view full answer...It sounds like you have a 4" x 4" square bumper, so the CE Smith #CE27310G would not work for your bumper since the bumper's width is going to be too wide. Using longer bolts could potentially work, but we do not currently offer any…
view full answer...The part #AKEBRK-7L-SA is the correct left hand side assembly for your trailer with 7k Lippert axles. For the right hand side you'd then want the part #AKEBRK-7R-SA. These are self adjusting brake assemblies that are the correct replacement for…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…
view full answer...