Wesbar Wiring - Trailer Connectors - 002402 Review
Products Featured in this Video
Review of Wesbar Wiring 002402
Speaker 1: Today we're taking a look at the Wesbar four-pole flat connector. This connector provides simple efficient method for rewiring your trailer, with a four-way flat trailer end connector.So, this would hardwire into your trailer's wiring, and then it would provide the plug, which would plug into the tow vehicle to send the signals back to the trailer.It's a nice design. When it comes to the wiring, you actually have two brown wires on the unit. So, you have a singular white wire, and then you have two brown. One brown runs with the green, the other brown runs with the yellow. So, this gives it the wishbone design.
That way you can run your stop, and turn, and tail signals down each side of your trailer.The connector has a easy grip design on the sides, and it's easy to identify, because the wires are labeled. So, your white wire's your ground wire, and then on the actual brown and green wire, the green says right turn, so that would be right turn and brake, and then brown is taillights, and then yellow is your left turn and brake, or driver's side, and then brown that runs with that is for the taillights.That's gonna do it for today's look at the Wesbar four-pole flat connector.
Info for this part was:
Video by:
Joshua S
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gregory H.
4/7/2020
Can I order now