Voyager RV Camera CSW3014 Review

content loading



Customers compare CSW3014 to these similar products




Products Featured in this Video



Review of Voyager Accessories and Parts CSW3014


Today, we're gonna be taking a look at the Voyager Multi Camera Controller for Observation Monitor. This multi camera controller allows you to add additional cameras to your existing monitor. It's gonna provide automatic triggered camera selection and is also compatible with non-Voyager LCD monitors that have an RCA composite video input. The unit's gonna feature your 50-inch male video output that reduces the number of connection points for a more robust design. You're gonna have one composite audio video output that's RCA. So, the white is audio-out, yellow is video-out.

Everything's gonna be labeled. This white wire right here has a label on it and that's gonna be the monitor trigger output control. So, the white wire connects to the monitor trigger wire. And then on this little harness right here, that's gonna measure about 70 inches long, you're gonna have your three trigger inputs for auto-mode functions. That's gonna come with the fuselage right here. That's a three amp fuse.

And all those wires are labeled for an easier installation. The red one right here says positive DC 12 volt only, blue is trigger camera one, brown is trigger camera two, green is trigger camera number three, and then this black wire is ground. And then over here, you're gonna have your camera inputs and they're all labeled as well. CA1, CA2, and CA3, for camera one, camera two, and camera three. Again, this is designed for use with Voyager cameras, but it can be used with non-Voyager LCD monitors. Taking a look at the overall dimensions, just measuring the box.

Edge to edge this direction, we're looking at a measurement of about three and three eights of an inch. Edge to edge this direction, just measuring the box, is gonna be about two and three quarters of an inch. And then the thickness is only about one inch thick. That's gonna do it for today's look the Voyager multi camera controller for observation monitors.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.