UWS Toolbox - Crossover - UWS00353 Review

content loading

Review of UWS Toolbox UWS00353

Today we are going to take a look at UWSs truck bed toolbox, part number UWS00353. This box is made here in the USA using 0.63-inch aluminum tread plate. Its finished in a black powder coat and UWS covers it with a one-year warranty. Its got 6.8 cubic feet of usable space and now we are going to go over some measurements. To do that well need to open the lid. The box measures 54 inches long.

Its 19-1/4 inches wide by about 13-1/2 inches tall. The lid of the box is reinforced and insulated with form. It not only serves to protect whats inside but it also adds extra structure to the lid so that it wont flex even when closing just by one corner. Theres a form gasket around the entire perimeter of the lid that helps seal it to the box and keep moisture from getting inside. Along the back of the lid is a full-length piano hinge.

This helps to make help opening the lid very easy. There are a pair of gas struts one on ether side that will assist opening of the lid also hold it open while you load and unload the box. There are two storage compartments on either side of the box. These are great for keeping small items readily accessible. Also inside the box is a sliding storage tray.

Again, its great for small items and it can travel almost the entire length of the box that we can keep small items handy but quickly get to whats below. There are two latches on the box, one on the driver side and one on the passenger side that are connected together with a connecting rod so manipulating one latch also opens the other. The latch on the drivers side is lockable, that way you can quickly get into your box after you get out of your truck and thats it for our review of the UWSs truck bed toolbox, part number UWS00353.

Questions and Comments about this Video

add comment