TrailerLegs Trailer Jack - Storage Jack - 326-TRLLG-6 Review

content loading

Customers compare 326-TRLLG-6 to these similar products

Products Featured in this Video

Review of TrailerLegs Trailer Jack 326-TRLLG-6

Speaker 1: Today we're gonna take a look at the TrailerLegs tire saver stands for triple axle trailers for a quantity of six stands. Now, these stands will protect and prolong the life of your trailer tires by keeping them up off the ground while your trailer's not in use. It eliminates any flat spots from prolonged periods of your tires bearing the trailer weight, so it will store your tires off the ground so they stay round.Basically, just place these durable stands on both sides of the axle. Use your vehicle to pull the trailer up onto the stands. One set, or two stands, is needed for each axle. These will also work great for camping trips because they're super stable.

The stands basically will lift your trailer wheels off the ground using the axles to support the weight of the trailer. It's a nice solid platform. Offers eight times the stability of rubber tires, which can flex under the weight of your trailer.It's a very simple five minute set up. All you have to do is place your stands next to the tires on either side of the trailer axle, put the U-shaped cradle portion here right up against the axle, and then just use your tow vehicle to move the trailer forward or backward, depending on where you installed the stands until the stand will pivot upright just like that and raise your axle and your tires off the ground.If you notice on the very bottom here, they use rubber gripping bars. They provide a nice, stable base and ensure consistent activation of the stands.

These stands are made of an HDPE material, which is high-density polyethylene, which will ensure strength and durability. They are made in the USA. Again, the application for these stands is this one is for triple axle trailers with leaf springs suspensions. They're great for campers, boat trailers, horse trailers, fifth wheel trailers, and more.This part is for a quantity of six stands. Weight capacity is a total of 24,000 pounds, which means 4000 pounds per stand.

The weight on each stand is about 10 pounds. The overall stand dimension when it's in an upright position is gonna be a length of about 15 inches long from here to here, about eight inches wide, and the height from the very bottom to the very top is gonna be about 19 inches tall. That should do it for the review on the TrailerLegs tire saver stands for triple axle trailers for a quantity of six stands.

Questions and Comments about this Video

What Do You Think?

* e-mail address format: [email protected]

I would like an email notification if someone replies to my comment

Info for this part was:

Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.