Draw-Tite Hitch Ball - Trailer Hitch Ball - TR63822 Review

content loading



Customers compare TR63822 to these similar products




Products Featured in this Video



Review of Tow Ready Balls TR63822


Today we're going to be taking a look at the two inch hitch ball with the medium shank. This is a two inch diameter ball that's going to allow you to tow a trailer with a two inch coupler. It actually has a capacity of 3,500 pounds, The hitch ball itself is made from a steel construction, it has a really nice chrome finish on it, and gives it a really clean look and it's going to help resist rust and corrosion. You'll also notice that on the sides, right here, we do have the wrench flats. On the sides of the platform, that really helps with the installation of the hitch ball. Especially making it easier getting it properly torqued according to the manufacture specifications. A few measurements to go over with you real quick starting with the diameter of the shank.

This one is going to give us a diameter of three quarters on an inch. The shank length from the bottom of the platform to the end of the threaded portion is going to measure two and three eighths of an inch long. This will fit draw bar thicknesses of three eighths of an inch all the way up to an inch and a quarter thick. You place this through the hitch ball hole in the draw bar or mounting surface. On the underside goes the included lock washer followed by the included nut. Then you can get it properly tightened and torqued to specifications.

That's going to do it for today's look at the two inch hitch ball with the medium shank. Again the shank is going to measure two and three eighths of an inch long and that's going to give a shank diameter of three quarters of an inch. .


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.