bing tracking image

TireMinder Tire Inflation and Repair - Pressure Gauges - TMG-042-39 Review

content loading

Customers compare TMG-042-39 to these similar products

Products Featured in this Video

Review of TireMinder Tire Inflation and Repair TMG-042-39

Today, we're going to take a look at the TireMinder mechanical pencil style tire pressure gauge. Now, this tire gauge will offer a plus or minus two PSI accuracy. The pressure range it will read, is from 10-50 PSI, and the units of measure it will measure in either PSI on one side or kPa, which is kilopascal, on the other side. This is an all metal construction. It is the pencil style. It has the pocket clip on it. This one includes a two times magnifier, to help you see the small numbers and increments on the pencil gauge.

What I'm going to do is, just zoom in a little bit more here and show you. When you put this on the valve and it shows your pressure, sometimes it's hard to read. If you just take this two times magnifier, you can see as you slide it over, you can see the numbers a lot better. Also, at the very top you'll notice, on the ball portion. You'll take your valve stem, let's say like this. You're going to test the pressure like that.

If it's got too much pressure, if you notice on the other end, you just flip it over. You can push down on the core to leave out some of the pressure. I'll give you a few measurements on this. Overall length is going to right at about six inches, and it's round diameter is about three-eighths of an inch. That should do it for the review on the TireMinder mechanical pencil style tire pressure gauge.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Kathleen M
Video Edited:
Kathleen M
Employee Zach D
Video by:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.