Timbren Active Off-Road Bumpstops: The Breakdown Video

Due to the design of the Timbren kit part #TABSOSR it would potentially fill with water if they were submerged. This eventually could lead to rusting out the base and even one guy remarked that when filled with water there is a "fart sound"…

For your 2018 Toyota Tundra the suspension enhancement I recommend is the Timbren kit part #TABSOSR because this kit installs easily, gives you the suspension support you need to greatly reduce the sag, and because it doesn't require monitoring…

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1" to…

Unfortunately Timbren does not make their Timbren Active Off-Road Bumpstops #TABSOSR kit without the axle bracket, so if you don't need it you'll just ignore it and install everything else. To figure out if you need a spacer kit #T68MR…

The Timbren Front Suspension Enhancement System like part #TFXF1004A should be in constant contact with the front end. If you have a gap from your leveling kit then you will want to use the Timbren 1/2" Spacer for Raised Frame Vehicles part…

When it comes to installing a front suspension enhancement system on your 2016 Nissan Titan XD The Timbren Front Suspension Enhancement System #TFXF1004A will work with your 2WD vehicle. The Timbren system has no drilling required and has a 4,000…

You have an interesting combination of circumstances with your 2008 Nissan Titan 4x4 that is both towing a 7000-lb trailer with a weight distribution hitch (WDH) and also using a fairly heavy Iron Bull front bumper with winch/hitch to maneuver the…

When installing any Timbren system on the 2019 Toyota Tacoma you should have about 1/2" to 1-1/2" between the frame and the spring after installation. You won't necessarily be losing wheel travel when you use a Timbren Rear Suspension…

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

We do have the Timbren Rear Suspension Enhancement System #TTORTUN4 for your 2005 Toyota Tacoma Pre-Runner 2wd. This kit has a rated capacity of 6,000lbs to reduce sag and improve stability. We also have the Timbren Active Off-Road Bumpstops #TABSOSR…