Review of Thule Replacement SnowPack Short Foot Extension - 1500052617 Video

Thank you for the picture, that really helped. I was able to track down everything but the attachment bracket, for this one I would need the model of your ski rack. However, for the bolt, you'll want #915-0650-54 which is a M6x50mm carriage bolt.…

The Replacement Top Assembly for the Thule Hullavator, part #7521771001, includes the two allen wrench headed screws, but not the lower washer slide plate. To replace the washer slide plate, you'll need part #853593802 I've attached…

To remove your old mounting brackets/feet, you will need to trace the bolt from the feet to the inside rail of your carrier. This will involve carefully removing components like the underside padding on your current mounts to access the bolt. Because…

Yes. The Yakima FatCat EVO 6 Ski and Snowboard Carrier #Y03096 will fit on any aero/elliptical aftermarket crossbar, including Thule Wing Bar Evo like the #TH711420.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

Hello Chris. The #ETBC7 kit your mentioned can be used for this purpose. This is more of a universal solution that works on any vehicle. The #118283 that I mentioned is a custom wiring harness and will be a much better option. Since you already have…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

Hi Adrian, thanks for reaching out! The correct replacement XR side rails for your 2019 Toyota Tundra with a 5-1/2' bed is the part #RTX75QR, and this is for if your Tundra has the Deck Rail System. If you don't have the Deck Rail System then…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hi David, There is an option for bump stops for your 2024 Toyota Tundra with a 3-1/2 inch lift by using Timbrens, you'll just need a spacer kit and some extra spacers to go with it. So what you can use is the Timbren Suspension Enhancement System…