Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118420 Review

content loading



Customers compare 118420 to these similar products




Products Featured in this Video



Review of Tekonsha Custom Fit Vehicle Wiring 118420


Speaker 1: Today we're gonna be taking a look at T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. This product fits certain years and models of the Mazda 3, Honda Fit, Mitsubishi Galant, Acura TSX, Honda Accord, and Honda Civic. To ensure, double check that this is a fit for your vehicle you can always use the vehicle fit guide at etrailer.com.This unit provides a four way flat connector at the back of your vehicle to power your trailers signal lights. This is compatible with five pole, six pole, and seven pole adapters, adapters are sold separately. And it comes with the dust cap for the four way flat plug, that way you can cover up the connection points when it's not being used.The black box on the unit is the included circuit protected taillight converter, this insures that your vehicle's wiring matches that of your trailers, this provides protection against electrical shorts and overloads. The unit is designed to connect quickly and easily, you don't have to worry about cutting or splicing any wires.

It also comes with detailed installation instructions to help walk you through that whole process step by step.What you'll need to do is locate you connection points in the trunk of the vehicle and plug in all of your connectors. Now these connectors are custom fit for your vehicle, so they're gonna match up perfectly with the post on the vehicle and they're gonna snap lock together for a nice, tight, secure fit. Once you have those plugged in you'll need to make a ground connection, that's your white wire with the ring terminal attached to it. You'll want to get that grounded to a suitable grounding location and then you'll need to mount the converter box to a safe, out of the way location. It does come with a grounding screw and some cable ties that we can get everything mounted and secured and you can secure any excess or slack in the wiring with those cable ties.One your installation's complete the four way connectors gonna be stowed within the trunk of the vehicle.

You have plenty of wiring here, that way you can extend it out the rear when you need to use it, roll it up and tuck it away when you don't. It is recommended that you use a small amount of dielectric grease in all of your electrical connections, like the plugs on the vehicle and the four pole connector itself. That grease is specifically designed to help prevent corrosion to the connection points. It is available and sold separately at etrailer.com.When it comes to the maximum ampers for the stop and turn lights we're looking at 2.1 amps per circuit, but for the taillights we're looking at five amps circuit. That's gonna do it for today's look at the T-One Vehicle Wiring Harness with the 4-Pole Flat Trailer Connector..


Questions and Comments about this Video

add comment

Info for this part was:

Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Hayden R
Test Fit:
Shane H
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Alan C
Video by:
Jacob H
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.