bing tracking image

Review of TecNiq Boat Lights - White Mini LED Accent Light - TN69FR

content loading

Customers compare TN69FR to these similar products

Products Featured in this Video

TecNiq Boat Lights - White Mini LED Accent Light - TN69FR Review

Hi there, I'm Michael with Today, we're going to take a quick look at this White Mini LED Accent Light. This is gonna provide a nice, bright white light for your boats or docks. It's gonna be great for upgrading or replacing a step, walkway, accent or courtesy light. This does have a 45 degree angle to it. You can see with our little plastic prongs there, it's going to cause the light to shine down.

So it's going to provide a nice downward facing light to illuminate the area below. This does have a sealed waterproof polycarbonate housing and a UV resistant lens unit. That's going to make this great for your water adjacent applications like your boats and docks, because it does have that IP rating of 68. And you're not gonna have to worry about water getting in there, causing any problems. And it is pretty compact in size.

So if we measure the width here, we're just over an inch. At about 1 and 1/8 of an inch long by about 3/8 of an inch thick. And about half an inch deep. You can see, we do have the 3 Light Emitting Diodes there, these are premium LEDs that are gonna be very energy efficient. They only draw about 0.07 to 0.09 amps, this holding unit.

They're also gonna be very long lasting and vibration resistant. So it will hold up well for us. And those 3 LEDs do provide 120 lumens for us. So if we turn off the lights in the studio here, you can kind of see how that lights up my table here. And then if I go to my wide shot, you can kind of see how it's lighting up my studio.

So it's gonna provide lots of light for how small it is. So if you're only using this to light up steps or walkway, you're gonna have plenty of light to see where you're stepping, make sure you're not gonna twist an ankle or step anywhere that you shouldn't. It does have a clear high clarity lens that provides 180 degrees of linear light. As well as a military grade circuit board construction, so they use a urethane potting instead of an epoxy potting, that's pretty common with other options. So this is gonna be, better protect all your circuit board systems to make sure that everything is gonna be nice and durable for you. This is designed for a surface mount installation. So the protective cover is sold separately. And if you wanna kind of finish it off, you can add that on. We do have that available for you here at But this is gonna hard-wire into your 12 volt DC system. You can see we've got a black wire and a white wire. Our black is actually gonna be our ground. And then our white is gonna be our live wire coming in. Let's see, give it power. You have about 7 inches of wire here to work with. So it should be very easy to hard-wire into your 12 volt DC system. And this does come with a limited lifetime warranty. So if you we're to have any problems with it, you're more than welcome to reach out to us here at We're always happy to work with our customers to make sure that you're getting good quality products and having a good experience. So this is gonna be in my mind, exactly what you're gonna need, if you're looking for a bright white mini led light for your boat or dock. We do have other colors as well as other styles available. So if you don't need that 45 degree angle, or if you're needing something a little bit bigger, along those lines, we've got lots of options available for you. So be sure to check out those other options, make sure you're getting exactly what you need for your application. That's gonna complete our look for today. Again, I'm Michael with Thanks for watching..

Info for this part was:

Employee Michael B
Installed by:
Michael B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.