Review of Taskmaster Tires and Wheels - Wheel Only - T134SMN5

content loading



Customers compare T134SMN5 to these similar products




Products Featured in this Video



Taskmaster Tires and Wheels - Wheel Only - T134SMN5 Review


Today we're gonna take a look at the Taskmaster 13 inch by 4 1/2 inch silver modular steel trailer wheel with the five on 4 1/2 inch bolt pattern. Now, this steel wheel is the modular design, and when we say modular design, that's the one that has the round holes all the way around the wheel. It's very sturdy and corrosion resistant. They do use an eco primer and silver powder coat finish over the wheel to help resist rust and corrosion. It does use the beveled stud holes, help keep the wheel securely in place on your trailer hub, and it helps eliminate the need for constant re-tightening of your lug nuts. If you'll notice the valve stem right here is included, installed into the wheel.

This wheel does meet the SAE J1204 standards.A few specs on this wheel, we're gonna measure the diameter and the width, and when you measure the diameter on the wheel you're always measuring inside to inside. You don't want to measure edge to edge. Basically what happens is when a tire is mounted on here, the tire bead will seat right here, so you're basically measuring bead seat to bead seat. So if we take our tape measure and if we go inside to inside on the diameter, you can see there's your 13 inch diameter. The width on the wheel is the same way, you'll be measuring inside to inside or bead seat to bead seat, 4 1/2 inches wide.

Bolt pattern on this wheel is a five on 4 1/2 inch bolt pattern. If you wanted to measure that on a wheel like this, that's an odd number of lugs. You can pick any one of the holes, let's say this one, and then you'll measure across to either one of these holes. You just pick one, but when you measure it's from the center of the starting hole to the furthest edge of the hole that you measure to.So this one, if we go center to furthest edge, it's 4 1/2 inches, so five on 4 1/2 inch bolt pattern. This wheel does use the wheel lug size of the half inch by 20.

Weight capacity on this wheel is 1,660 pounds. And the last measurement I want to give you is the pilot hole diameter, that's the large hole here in the center of the wheel, goes over the hub on your trailer. Diameter of that opening is 2.99 inches.But that should do it for the review on the Taskmaster 13 inch by 4 1/2 inch silver modular steel trailer wheel with the five on 4 1/2 inch bolt pattern.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.