Review of Taskmaster Tires and Wheels - Tires and Wheels - T134WMS5

content loading

Customers compare T134WMS5 to these similar products

Products Featured in this Video

Taskmaster Tires and Wheels - Tires and Wheels - T134WMS5 Review

Today we're going to take a look at the Taskmaster 13" x 4 1/2" White Modular Steel Trailer Wheel, with the 5 on 4 1/2" bolt pattern. Now, this is a steel wheel, with a modular design. The modular design is the one that has the round holes all the way around the wheel. This wheel's very sturdy and corrosion resistant. Uses an eco primer, and a white powder coat finish, to help resist rust. Does use the beveled stud holes, to help keep the wheels securely in place on your trailer hub.

This eliminates the need for constant re-tightening of your lug nuts. If you notice, the valve stem is included.This wheel does meet the SAE J1204 standards. A few measurements on this wheel, first we're going to measure the diameter. And the diameter of the wheel is always measured inside to inside, basically when a tire's mounted on here, the tire bead will seat right here. So what you're measuring is from the bead seat to the bead seat.So, if we take our tape measure, and if we go inside to inside you can see there's 13" diameter.

The width on the wheel is the same way, inside to inside, or bead seat to bead seat. It's 4 1/2". The bolt pattern on this wheel is a 5 on 4 1/2" bolt pattern. If you wanted to measure the bolt pattern, what you can do on a wheel that's an odd number of lugs, in this case five, you just pick any one of the holes, let's say this one. And then you can measure across from this hole to either one of these holes, you just pick one of them.

So when you measure it, it's from the center of the starting hole, to the furthest edge of the hole that you measure too.So this one, if we go center, the furthest edge, you can see 4 1/2", so 5 lug, 4 1/2" bolt pattern. This wheel does use a wheel lug size that's a 1/2" by 20. Weight capacity on this wheel is 1,660 pounds, and the last measurement I want to give you is the pilot hole diameter. That's the large hole here in the center of the wheel. Diameter of that is 2.99 inches.But that should do it for the review on the Task Master 13" by 4 1/2" White Modular Steel Trailer Wheel, with the 5 on 4 1/2" bolt pattern..

Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.