Review of SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371304010

content loading



Customers compare 3371304010 to these similar products


Products Featured in this Video



SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371304010 Review


Today we're going to take a look at the replacement one and a half inch by twelve inch power angling cylinder for the Meyer's snow plows. Now this part will replace the lift and angle cylinders in the Meyer and Diamond snow plows. It does replace the Meyer part number 05437. It does have a twelve inch stroke with a single acting lift cylinder. Center to center dimensions on this, when it's retracted, which it is now, from the center of this hole to this hole is gonna be 18 inches. And then of course when it's extended it'll be 30 inches, since it has a 12 inch stroke.The thickness on the rod itself is gonna be right at one and a half inches.

The base is gonna be right at one and five eighths inches. The bore size will be the rod diameter which is one and a half inches. The pin size, which is the diameter of these holes here, where the pins will go into, and that's gonna be right at five eighths of an inch. The port type right down here is a quarter inch NPT. And the location of it is in line.

But that should do it for the review on the replacement one and a half inch by twelve inch power angling cylinder for Meyer's snow plow.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.