Review of Retrax Tonneau Cover - Replacement Key Fob - RTX36TR Video

It might David but I have no way of knowing for sure without that serial number. The Replacement Key Fob item #RTX36TR matches up with covers that have a serial number of 1701 or higher. There's no other way to identify if this is the one you…

Hi Edward; we have the Replacement Remote Receiver for Retrax Powered Retractable Tonneau Covers Manufactured After 2017 #RTX89TR available. More than likely this will work for your cover but it would be a good idea to check the serial number. The…

Hey thanks for reaching out, Jeremy. It does not sound like a motor issue since the cover can open and close normally. This is a problem with the remote or with the receiver. The only fix for this is a replacement. The Replacement Remote Receiver for…

Hello Lonnie. If your cover did not come with a remote, you will need to replace the receiver. Based on your model number 4100-017, the correct remote receiver kit would be part #RTX89TR.

Yes, I can help you out with a new remote receiver for your Retrax cover on your 2021 GMC Sierra. - Replacement Remote Receiver for Retrax Powered Retractable Tonneau Covers #RTX89TR The Replacement Remote Receiver for Retrax Powered Retractable…

Be sure to also check any paperwork/manuals for your Retrax Powered Retractable Tonneau Cover. If you do not have this number anywhere or do not know if the cover was manufactured after 2017 for the Receiver #RTX89TR, you will most likely need a new…

I checked with my contact at Retrax and they ran your serial number. They confirmed that the F09-2027 will be the correct remote receiver kit for your cover. We have this listed under part #RTX89TR, so it looks like you were on the right track in the…

We do have the replacement hardware needed for your Curt Trailer Hitch Receiver #C15810. You will need to use the Replacement Hardware Kit for Trailer Hitches #RHK and input the 15810 in the box that says "Hitch Item Number".

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…