Redline Trailer Fenders - No Step - F9X32-1RTP Review

content loading



Customers compare F9X32-1RTP to these similar products




Products Featured in this Video



Review of Redline Trailer Fenders F9X32-1RTP


Today we're going to be taking a look at part number F9X32-1RTP. This is Redline's single axle trailer fender 14 gauge steel, tread plate design, it's designed to fit 14 inch to 15 inch diameter wheels. It is a weld-on application. It's going to have a 1 inch lip radius here on both sides, the front and the back. The side I'm showing you right now is the back side. I wanted to show you that it has a 90 degree angle here on the back for mounting it and welding it onto the trailer. Here on the front, it's got a nice roll to it so that's not 90 degrees.

You'll be able to decide which side is 90 degrees because of that angle and which side gets mounted onto the trailer. Again, it's got the nice tread plate design, 14 gauge steel construction, very strong and durable. Gives it a nice rugged look with that tread plate design. This fender's going to be made in the USA, it's designed for single axle trailers with 14 inch to 15 inch diameter wheels. If we take a look at the overall dimensions starting with the overall length measuring from edge to edge, it's going to give us a measurement of 32 inches. The overall height, that's going to measure 15 1/4 of an inch and the overall width, it's going to give us a measurement of right at 9 inches.

With this part number, you're going to get one fender. That's going to do it for our review of part number F9X32-1RTP. This is Redline's single axle trailer fender. .


Questions and Comments about this Video

add comment

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.