All You Need to Know About the Hayes 10" Electric Trailer Brake Assembly Video

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…

Hello Blake, thanks for reaching out. I did some digging and I was able to find a reference for the 92655 hub. This uses the 15123 inner bearing and 25580 outer bearing. It will be a 12" drum as well. This reference didn't tell me the bolt…

Hey Ronald, based on the part number you mentioned the correct brake assemblies would be the etrailer brake assemblies part #AKEBRK-7-SA which are a self adjusting set that are the correct capacity for the hub/drums that you have.

Hey John, thanks for reaching out! To replace the brakes and hub/drums on your 2024 Grand Design Momentum 31G you'll need the following: - etrailer Electric Trailer Brakes #AKEBRK-7-SA (1 per axle) - Easy Grease Trailer Hub and Drum Assembly…