bing tracking image

Pro Series Trailer Jack - Side Frame Mount Jack - PS1400950376 Review

content loading

Customers compare PS1400950376 to these similar products




Products Featured in this Video



Review of Pro Series Trailer Jack PS1400950376


Today we're going to review part number PS1400950376. This is the Pro Series side winding square jack with a 12,000 pound weight capacity. This jack is a heavy duty weld on square drop leg jack which will include the side winding crank and it has the front facing plunger pin. This is perfect for agricultural, construction, livestock or heavy duty utility application. It's made of a sturdy steel construction which will provide heavy duty durability. It is weather resistant.

It has the grey finish on the inner and the outer tubes to protect it from the weather. The drop leg on this jack has a spring return which will increase your overall extension for maximum adjustability. Basically if you pull this plunger pin out and turn it to lock in the side here you could pull your drop leg down. Theres a couple of different holes on the side, let me show you. You can see one right there.

There's a few that go all the way up there. You just pick the right selection youd want and then pull your plunger pin out, let it go into the hole for the correct height and then when you need to retract it if you just pull it and set it there it will automatically return to its retracted position. This jack is a direct weld-on design. Again, the side-wind crank is included and the weld-on bracket that holds the handle. The total static weight capacity on this jack is 12,000 pounds.

The lift capacity is 10,000 pounds. The measurements on this, if you crank in a clockwise position it will extend the jack out. If you go in the counterclockwise position the jack will retract. With this jack in the fully retracted position with the drop leg fully retracted would be 28-1/4 inches height. In the fully extended position with the jack fully extended out and the drop leg fully extended out would be a total of 54-1/4 inches.

The drop leg travel amount is 13-1/2 inches. The amount of lift when you crank this jack total would be 12-1/2 inches. That would give you your total travel of 26 inches. This jack does come with a limited one year warranty. That should do it for review on part number PS1400950376.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.