Optronics Trailer Lights A33GB Review

content loading



Customers compare A33GB to these similar products




Products Featured in this Video



Review of Optronics Accessories and Parts A33GB


Today we're going to review part number A33GB. This is the Optronics grommet for the ST33 and STL33 flush-mount trailer lights. This is a rectangular black rubber grommet. It has the rounded corners for flush mounting either the ST33 or the STL33 series lights. This rubber grommet will give shock mount protection and extends the life of the lamp. Got an example here.

This is an ST33 Optronics lamp and basically what this would do when you go to install it just pops right into the grommet just like that. You can see on the very back here the grommet has an open back which allows for access to the necessary wiring to plug in and when you do install this with the light and the grommet, it does require a 3-wire plug that plugs into there. We sell two separate different, or two different ones, one is a straight. This one right here is part number A45PB and this is the straight 3-wire plug. When you plug it in you can see the wires come straight out. The other option is the A47PB and that's the right angle design. Basically that's made to when you install it you can see the wires would come out at a right angle.

Those parts are needed, or required, to install this onto your trailer. That should do it for the review for part number A33GB. This is the Optronics grommet for the ST33 and STL33 flush mount trailer lights. .


Questions and Comments about this Video

add comment

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.