bing tracking image

Review of Mount-n-Lock RV and Camper Hitch - Bumper Mount Hitch - MNT47FR

content loading

Customers compare MNT47FR to these similar products




Products Featured in this Video



Mount-n-Lock RV and Camper Hitch - Bumper Mount Hitch - MNT47FR Review


Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at the Mount-n-lock 2-inch, HiLoHitch for a 4" RV bumper. Now this HiLoHitch is designed to mount around your 4-inch RV bumper, giving you a place to secure your bike racks, cargo carriers and other hitch accessories. Uses a unique clamping hitch design, has a pressure plate and heavy duty fasteners that'll secure your bike rack or your cargo carrier in place. The pressure plates will distribute clamping force, reducing the risk of any damage to your accessory.

And it can be mounted with this hitch opening above the bumper or turned over like this below the bumper, either way. It is a nice safe design, eliminates common failure points such as load bearing welds and bolts. The retention bolt right up here reduces bouncing and shaking of your hitch mounted cargo, makes it very stable.You just tighten this half inch heavy duty retention bolt, and the retention fasteners at the bottom here once the bike rack or the hitch rack accessory's inserted. And that'll reduce any bouncing and shaking. This is designed to fit 2" or 1.25" bike racks or cargo carriers.

The hitch pin hole right here is a three quarter inch diameter hitch pin hole. Now it does include all these parts. Basically these parts will be built around the 4" RV bumper, and includes base plate, side plates, pressure plates, retention brackets, the retention bolt with the pressure nut, the face plates and the retention fasteners right down here. Has a nice set of instructions that'll take you step by step on how to put this all together. The mounting hardware is corrosion resistant.

These parts have a nice glossy black powder coat finish on them. They are made in the USA. Again, this is designed to mount around a 4" square RV bumper. The hitch opening it gives you is a 2" by 2" hitch opening and the maximum capacity on this, the hitch is rated for 300 pound feet of cargo carrier, which will exceed most full bike racks with bikes. But that should do it for the review on the Mount-n-lock 2-inch, HiLoHitch for a 4" RV bumper..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video by:
Chris R
Employee John S
Video by:
John S
Employee Conner L
Test Fit:
Conner L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.