Customers compare 100833-36 to these similar products
Products Featured in this Video
Today, we're going to be taking a look at the MB Sturgis propane hose assembly. This is used to connect dual LP cylinder systems to a two-stage regulator. It's going to feature your RV type-1 connector on this side. On the other end, it features a 1/4" male inverted flare. The type-1 provides a higher flow rate resulting in a decreased potential for the system to go into bypass mode, therefore, shutting down the gas supply to the system. This assembly measures around 36" long, a nice thermal plastic construction, with stainless steel overbraid provides additional protection to the hose.
It's going to feature a type-1 dark green connector that includes an internal back check to ensure that they system does not allow a back flow gas leak. The inner diameter of the hose is going to measure 1/4". The unit features a heat sensitive thermal shut-off device to shut off the gas in extreme heat situations. When it comes to certification, we're looking at UL569 and ANSIZ21-81 certification. This is designed for LP gas only. When it comes to the temperature range for the assembly, we're looking at -40 degrees Fahrenheit to 140 degrees Fahrenheit, and the maximum flow capacity is 200,000 btu per hour.
That's going to do it for today's look at the MB Sturgis propane hose assembly.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Questions and Comments about this Video