bing tracking image

Review of Kwikee RV and Camper Steps Parts - Replacement Motor for 42 Series - LC379167

content loading

Customers compare LC379167 to these similar products

Products Featured in this Video

Kwikee RV and Camper Steps Parts - Replacement Motor for 42 Series - LC379167 Review

Ellen: Hey everyone. I'm Ellen here at, and today we're going to be taking a quick look at the replacement motor for your quickie step. This is going to be for the 42 series steps. That's going to be the one that's kind of an enclosed housing, and it's going to slide directly out from your RV rather than kind of deploying out and down. So this is going to be that replacement motor if one happened to not be working for you, it started to fail out. This is going to be an older style step.

It's manufactured since 1999, so things can go bad. And this is going to be that piece that we need to make sure that everything's working again.So here's a little closer look at it. We're going to plug in our wiring up here at the top with that little port that's in there, and then the linkage arm is going to connect to this little gear here. So this is the part that's going to operate the automatic shutdown. So if you happen to deploy those steps out maybe a little too close to a pylon or some kind of obstacle, and it happens to strike that, it will automatically retract the step.

So if that's gotten broken or maybe got fried out, that would maybe be a reason why you'd want to replace this. Has the holes here to mount in place. Does not come with any additional hardware.As far as specs with this, it's going to be about six and three quarter inches long, and then four and three eighths inches wide. And about one inch, or excuse me, about two inches tall. The current draw for a clockwise operation is going to be 17.2 amps.

Counter-clockwise is 20.1 amps. The RPM rating for this is 40.4 in a clockwise configuration, and then 31.8 for counter-clockwise. It does weigh just about a pound and a half. 1.63 pounds. Has a one-year warranty and is made in the USA.That's about all there is to it for a replacement motor for the quickie step.

I hope this video's been helpful in deciding if this is going to be the right component for you. If not, we do have others available here, so check them out. Thanks for watching.

Questions and Comments about this Video

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.