Hands-On with the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel Video

We have two options for replacement wheels and tires for your Triton Snowmobile trailer. The tires are identical they are Kenda 205/65-10 bias trailer tires that have a load range of E. This means they have a maximum capacity of 1,650 lbs at 90 psi…

The overall diameter of a trailer tire in the size you mentioned of 20.5x8-10 like part #AM1HP54 has a diameter of 20.6 inches.

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

The modern day equivalent of a 20.5 x 8-10 tire is going to be a 205/65-10. The dimensions are as close as you can get to the old size. We have several tires and tire and wheel combos in this size with various bolt patterns (if a wheel is needed).…

Axles that are 3,500 lbs are all 2-3/8 inches in diameter, and that is the diameter of the 3,500 lb Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs #35545I-ST-89.

Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and…

I assume you are wanting to add an in line fuse to a 12V power circuit running from your vehicle battery to the trailer connector on your vehicle. There are a few things to consider before adding an in line fuse to a 12V power lead to a trailer…

Thank you for providing the part number from your existing grease seal, part 16074-224. Based on my research I found that part #10-9 is an equivalent replacement part. I have also linked a helpful article and video concerning bearings and seals.

Aluminum wheels actually would hold up better than galvanized ones since aluminum does not corrode like steel does. So the Aluminum Liger Trailer Wheel #LH49FR that you referenced would work great for you and would last a long time.

Like you said the 7 x 1-1/4 inch electric brakes #AKEBRK-2 will work with reduced braking. But there is another thing to consider and that is that not all brake drums are compatible with both electric and hydraulic brakes. In most cases it is one or…

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…