bing tracking image

Review of Kats Heaters - Vehicle Heaters - KH28216

content loading

Customers compare KH28216 to these similar products




Products Featured in this Video



Kats Heaters - Vehicle Heaters - KH28216 Review


Today we're gonna take a look at the replacement cord for Kat's Heaters Immersion Heaters and Block Heaters. Now, this is a direct replacement for the six foot long cord that comes with your Kat's Heater. This is gonna work with either your immersion heater or diesel frost plug style, or any non-diesel frost plug style block heater with that two prong plug style. It does connect with that 90 degree female end. You can see we'll have our two holes there that will receive the two prongs on our heater end. Just plugs into place.

You want to make sure that you have it fulled seated into your block heater or your frost plug, or whatever you're using it with, and then you can tighten it down with the nut on that end.The cord is just gonna route through your grill and plug into any standard 120 volt AC outlet. This is gonna be CSA approved, and it is made the USA. Again, this works with 120 volt DC, or AC outlets, and it's gonna work with up to 1800 watts and up to 15 amps. The cord length is going to be six feet. It is gonna be 16 gauge wire, and again it is a made in USA product.

That's gonna do it for our look at the replacement cord for Kat's Heaters Immersion Heater and Block Heater.


Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.