bing tracking image

Review of JR Products Propane - Hoses - 37207-31455

content loading

Customers compare 37207-31455 to these similar products

Products Featured in this Video

JR Products Propane - Hoses - 37207-31455 Review

Michael: Hi there. I'm Michael with Today we're going to take a quick look at the JR Products propane hose, and like most of your propane hoses out there, this is designed to allow your LP gas to flow through so you can connect it between point A and point B to power up your propane-powered appliances. There are a few things that you want to look for when you're shopping for a propane hose. Obviously you want to make sure that it's going to work for your setup.So, the first thing that you want to look for is the length. You want it to be able to reach from point A to point B so that it can connect securely and pass that propane along.

This is a 40 inch long hose, so as long as your A and B are less than 40 inches apart, it should work. The hose is a rubber construction, which is going to help reduce kinks and cracking, anything like that. It's got an internal diameter of three-eighths of an inch, so that's going to be plenty of room for that propane to flow through, so you should be able to run all your propane-powered appliances all at the same time.The next thing that you want to look for are your fittings. There are several different kinds of fittings available for propane hoses. You can see we've got two different ones here.

This one is our three-eighths inch male in PT fitting. This is most likely going to fit onto your regulator, although it could fit into a different port depending on what your setup is, but most cases that will fit onto the regulator on your travel trailer or RV. The other end is our half inch female SAE swivel end. It's a swivel end because it can move like that. Obviously that's going to make it much easier to thread in to our fitting rather than having to turn the whole hose to get it tightened down.There are several different kinds of SAE fittings, so if you look inside there, you can see that it's going to kind of taper down towards our hole.

That is our flair. So, you do want to make sure that you need the SAE flare fitting, female end for your setup. This hose is UL and CSA approved, so it's going to meet those quality standards. It's going to do a good job holding up. It's going to do what you need it to do.

Keep in mind if this is not the hose that you need, maybe you need a different lengths or you've got different fittings, I'd encourage you to come take a look at our options here at Our goal is always to help you find the product that you need to solve your problem, so you can get back to enjoying your time outdoors. That's going to complete our look at the JR Products propane hose.

Questions and Comments about this Video

Info for this part was:

Employee Michael B
Installed by:
Michael B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.