Customers compare FRCBRKT-BL to these similar products
Products Featured in this Video
Today we're going to take a look at the Furrion wireless observation or backup camera pre-installed mounting kit. Now this short finned shaped bracket will provide a nice waterproof housing for your Furrion camera system. This bracket is designed to be used with the Furrion wireless backup system. Part number FRC12TA-BL or the wireless observation system, part number FOS48TA-BL. Both of those… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…
view full answer...For a replacement mounting bracket, you can use part #FRCBRKT-BL. This is compatible with all Furrion Vision S RV cameras that use the shark fin style housing, including your model FOS48TAPK-BL, which has been replaced by #FOS43TASF.
view full answer...The #FRCBRKT-BL that you have on your camper indicates you have a Furrion Vision S system so you have a few options for monitors that will work with what you have. -Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR…
view full answer...Based on the sharkfin camera mount in the picture you provided I can tell you that your 2021 Amerilite 189DD was prewired for Furrion cameras #FRCBRKT-BL. Because of this you won't be able to find an adapter but can cut the plug-in off of the…
view full answer...That is exactly what the adapter was designed to do. The Furrion #FR87PR is designed to provide the proper amount of voltage on the running lamp circuit of the 7-way so a camera system will receive enough power to operate reliably. Ford and GM 2019…
view full answer...The only mount we currently offer for the 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR is the Replacement Suction Cup Mount for Furrion Vision S 5" and 7" Monitors part #FR79SR. This mount installs onto the…
view full answer...The older Furrion cameras are not compatible with the Furrion Vision S Wireless RV Backup Camera Systems. You would be safer going with a a whole new kit so that all of your set up is updated and will work great for you for the years to come. The…
view full answer...Sounds like you are looking for a replacement mounting bracket for the Vision S camera which we have with the part #FRCBRKT-BL.
view full answer...Since the Loadstar K399 Bias Trailer Tire #AM1HP54 has a load rating "D" and a ply rating of 8, the recommended PSI for the tire is 70.
view full answer...It would seem that the 1,750 rating that your tire has is the weight rating, but most ST205/75-14 tires with a Load Range of C have a 1,870 lb capacity at 50 psi like part #AM10229. That would mean that when you combine the two tires you have an…
view full answer...EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…
view full answer...The Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1 #FRCBRKT-BL is the only way to get the Shark Fin Mount without replacing the entire camera.
view full answer...