bing tracking image

Fulton Trailer Fenders - Top and Side Step - F008574 Review

content loading

Customers compare F008574 to these similar products




Products Featured in this Video



Review of Fulton Trailer Fenders F008574


Today we're going to be reviewing the Fulton single axle trailer fender with top and side steps. This is going to be in a white plastic construction, designed for fourteen inch diameter wheels. It's going to be sold individually with part number F008574 and it's also sold as a pair with part number F008574-2. Now just right up front, I want to point out that it is going to feature the built in steps. It's also going to feature the cut-outs here on the back of the fender, that's going to be these two locations here. Now these are going to be pre-cut mounting slots, that way you can mount this fender using a bracket mount installation. If we take a measurement of the cut outs right here, measure this one up here so you can get a little bit of a better view, that's going to give us a width of four and one-eighth of an inch.

Now on the inside it's also going to have the mounting slots that are already pre-cut. Going to be the same on either side there. You can see these here, if we take a measurement center on center, the distance between those, that's going to give us a measurement of three and three-quarters of an inch. Then if we take a measurement, the distance that we have between those mounting areas, that's going to give us a measurement of about thirty and one-quarter of an inch. Brackets and mounting hardware are going to be sold separately.

We do offer some different typed bracket mount installations and so if you need to pick up some brackets you can check out some different options here at etralier.com. You can also use your existing mounting hardware and existing brackets and you can modify those as needed. Now, again, you're going to have the three steps. This fender is going to offer a capacity of three hundred pounds. If you purchase it in a pair the other fender is going to be identical to the one I'm showing you right now. It's made from a high density polyethylene material so it's going to be corrosion proof and impact resistant.

Now one of the neat features about this fender is that the color is actually molded into the plastic so it's a nice bright white color. On the backside it's going to feature the built in fender skirt. On the front you're going to have the nice rolled lip that goes around the opening here. This product is made in the USA, it's designed for single axle trailers with fourteen inch diameter wheels. Now were going to go over the overall measurements. Taking a measurement of the overall length.

I'm going to flip it around, it's a little bit easier to get that measurement I'm measuring here at the back. Overall length from edge to edge, that's going to give us a measurement of forty-two and five-eighths of an inch. The overall height, that's going to give us a measurement of twelve and three-quarters of an inch. Then the overall width, that's going to give us a measurement of nine and five-eighths of an inch. Now when it comes to the different steps, again, you're going to have the two, one up front or one at the rear, one on top. You're going to have three steps. The step here on top is going to give us a width at the widest point of about eight inches. It's going to give us a depth of about four and three-quarters of an inch. Now each step is going to have a really nice textured surface, that way it's going to ensure proper footing and it's going to give you an adequate grip and secure hold when you're using these steps. Again, they're going to offer a capacity of three hundred pounds. The steps here at the front and the rear, they're going to be identical. They're going to give us a width of about six and one-quarter of an inch. Then measure in this direction, it's going to be about nine inches. That's going to do it for our review of the Fulton single axle trailer fender for fourteen inch diameter wheels. Again, this is sold individually with part number F008574 and it's sold as a pair with part number F008574-2. .


Questions and Comments about this Video

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Leah B
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.