Fulton Spare Tire Carrier - Frame Mount - FSTC1000301 Review

content loading

Customers compare FSTC1000301 to these similar products

Products Featured in this Video

Review of Fulton Spare Tire Carrier FSTC1000301

Speaker 1: Today we're gonna take a look at the Fulton high mount spare tire carrier. This will mount your spare tire up and out of the way with this carrier. This will fit both a four lug and a five lug reel, and it ends up fitting onto a three-inch by four-inch trailer tongue. This includes everything shown here on the table. Includes the carreir itself, the hardware to mount the wheel to the carrier, and the hardware to mount the carrier to the trailer. It is a clamp-on installation.

You can see I put these together just to give you an idea what it looks like. There's no drilling required. Uses a welded reinforced steel plate construction. It's corrosion resistant with a zinc plating. And as I mentioned, it fits both four-lug and five-lug wheels, basically it's just how you position the bolts right now.

You always have one in the bottom hole, and then there's two holes up here. With it like this, it'll fit the five-bolt, five on 4 1/2 inch bolt pattern, and if you move this over to the center hole and use the bottom one, it'll fit a four-inch, four on four-inch bolt pattern with a ten-inch diameter or larger wheel.This will not work with the five on 4 3/4, the five on five, or the five on 5 1/2 inch bolt patterns. The tongues that fits on the trailer tongues, it's designed to fit a three-inch wide up to four-inch high trailer tongue. And I do wnana give you a few measurements on this. The rise, which will be measured from the center of this plate to the center of that plate, is gonna be right at 5 1/2 inches.

The distance when you mount this onto your trailer tongue, the distance from here to the mounting plate is gonna be right at 4 1/2 inches total. And the mounting plate itself is gonna be four inches by 5 1/2 inches. And again, it comes with everything shown here, even a nice set of detailed instructions. But that should do it for the review on the Fulton high mount spare tire carrier.

Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Jeff D
Installed by:
Rick A
Installed by:
Hayden R
Video Edited:
Patrick B
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.